ATI 6D Aerosol Generator
Printable Specification Sheet
A tough, portable solution
The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator. It is ideal for testing a wide variety of filter systems with airflows up to 2,000 cfm by generating a poly-dispersed, sub-micron aerosol. Applications include workstations, negative-pressure filtration units, biological safety cabinets, ceiling modules, and more.
The 6D can also be used for testing positive pressure systems using an optional hose adapter. On-site routine maintenance is easy. And its integrated compressor makes implementation simple - all you need is a power source.
Performance Guaranteed
6D aerosol output is regulated with a standard issue calibrated pressure gauge; guaranteeing 20psi across the nozzle as specified in industry standards. The 6D complies with all applicable electrical and safety requirements and is supplied standard with the CE mark.
Easy to use
Integrated liquid fill sight glass, drain port, and power cord storage make operating, transporting, and storing the 6D simple and easy.
Optional Hose Adaptor Kit
A hose adaptor kit, used to introduce aerosol remoy, connects easily to the standard outlet using the sanitary flange or simple NPT connection.
Product specifications:
AEROSOL OUTPUT RANGE: 50 - 2,000 cfm
AEROSOL CONCENTRATION: 100 ug/l @ 200 cfm / 10 ug/l @ 2,000 cfm
GENERATOR TYPE: 2 or 6 Laskin Nozzle Jets （1/2 or 1-1/2 Nozzles）
AEROSOL TYPE: Poly-dispersed （Cold）
SIZE:14-1/2” L × 10” W × 9” H （37cm L × 26cm W × 23cm H）
WEIGHT: 34lbs （15kg）
ELECTRICAL: 110VAC/60 Hz or 220VAC/50Hz
COMPRESSED AIR:Not Required, On-Board, Integral Compressor
STANDARDS COMPLIANCE:
Filtration Industry: NSF 49, IEST, ISO-14644
Electrical. & Safety: CE, FCC, EN61010-1:2010, EN61326-1:2006
Aerosol output calculation
The 6D includes a total of 1-1/2 Laskin nozzles. Each "full" nozzle consists of four jets located at the nozzle tip, for a total of six jets. The aerosol concentration depends on the compressed air pressure and flow available for consumption by the nozzle. With 20 psig applied, each jet emits 18.75 slpm of air containing 1,275 ug/l of aerosol. When this aerosol is diluted with 135 cfm of air, the aerosol concentration becomes approximay 25 micrograms per liter. The equation below is for purposes of calculating the aerosol output in micrograms per liter （ug/l） when 20 psig is applied to the nozzle jets.
3,375 x （# of jets being used） divided by the total airflow （CFM）
NOTE: If more than 20 psig is used, the output concentration will increase and, conversely, if less than 20 psig is used, the output concentration will decrease.
Applications
· Clean Rooms
· Laminar Flow Benches
· Biosafety Cabinets
· Glove Boxes
· HEPA Vacuum Cleaners
· HVAC Systems
· HEPA Filters
· ULPA Filters
· Negative Pressure Filtration Units
· Surgical Suites
· Nuclear Filter Banks
· Collective Protection Filters
· Research and Development
Industries
· Pharmaceutical
· Food Processing
· Veterinary Medicine
· Laboratories
· Asbestos Abatement
· Heavy Metal Processors
· Nuclear Power and Fuel
· Hospitals
· Chemical Processing
· Certifiers
· NBC Defense Agencies
· Governmental Labs
· Filter Manufacturers
· Micro Electronic
· Electronic
· Biotechnology
· Micromechanics
