污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料
卓尔瑞华（北京）科技有限公司
卓尔瑞华（北京）科技有限公司
WIKA D-10-7标准 D-11-7 平嵌隔膜 带Profibus® DP的压力传感器
| 接口尺寸： | G1/2（mm） | 加工定制： | 是 |
| 防护等级： | IP65 | 测量范围： | 0 ... 250 mbar to 0 ... 1000 bar（kPa） |
| 类型： | 陶瓷型压力变送器 | 防爆等级： | 无 |
| 型号： | D-10-7标准 D-11-7 平嵌隔膜 | 测量介质： | 液体 气体 |
| 精度等级： | 0.1 | 品牌： | WIKA/威卡 |
| 输出信号： | 4-20（mA） | 电源电压： | 10-30（V） |
WIKA D-10-7标准 D-11-7 平嵌隔膜
带Profibus® DP的压力传感器
Pressure transmitter with Profibus® DP interface
Model D-10-7, standard version
Model D-11-7, flush diaphragm
Fig. left: Pressure transmitter D-10-7
Fig. right: Pressure transmitter D-11-7
Applications
Automation engineering
Test bench construction
General industrial applications
Special features
Profibus® DP interface （EN 501730）
High accuracy up to 0.1 % incl. temperature error
Inligent sensors with calibration and diagnostic functions
Transmission rate up to 12 MBaud
Measuring ranges: 0 ... 250 mbar to 0 ... 1000 bar
Description
Bus technology
Profibus® DP （Decentralized Peripherals） stands for easy, quick, cyclical and determined process data exchange between a bus master and the assigned slave instruments.
This process is based on the well-tried RS485 transmission technology.
In the background of every Profibus® PA system is a Profibus® DP network behind the segment coupler. Based on its quick and cost-effective transmission technology, Profibus® DP is the best choice for applications in areas which are not intrinsically safe （non Ex）.
WIKA precision sensors
The ® DP transmitter is based around a sensor design with integrated dynamic temperature compensation. It offers the user an accuracy up to 0.1 %, without any additional temperature error, within the temperature range of 0 ... +50 °C.
Fully-welded and with in-house manufactured thin-film and piezo sensors, there is absoluy no need for additional sealing materials. WIKA's sensors are already known for their high load cycle stability, resistance against pressure spikes
and low non-repeatability.
Safety
Through coordinated EMC measures, in combination with the integrated galvanic isolation within the instrument, a high level of data security is guaranteed, even at transmission rates of up to 12 MBaud.
Comprehensive diagnostics routines, as well as the determination of the medium temperature, are available via Profibus® DP services in accordance with EN 50170.
The electrical connections are achieved using M12 x 1 circular connectors per IEC 60947-5-2 for the data transmission and power supply. Thus an ingress protection of up to IP 65 is achieved and a simple and secure connection to the bus is ensured.
Dimensions in mm
Pressure transmitter
Electrical connections
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
