BTd51-G不锈钢防爆投光灯 BAT51-G结构要求 1、防爆投光灯外壳材质采用含镁量不大于6%(重量比)的铸造铝合金制造。 2 、防爆投光灯所有紧固件必须有防止自行松脱措施。 3 、防爆投光灯的透明罩应采用钢化玻璃制造。 4、防爆投光灯所有黑色金属零部件必须具有防锈措施,表面不得有镀层脱落现象。 5、防爆投光灯应设有内外接地螺钉,内外接地螺钉应符合GB3836.1-2000中15章规定。 6、防爆投光灯采用止口接合面的防爆型式,并有防水措施,防爆标志为ExdⅡBT4的投光灯,隔爆接合面宽度L≥12.5mm,间隙(直径差)ic≤0.15mm;ExdⅡCT4的投光灯,隔爆接合面宽度L≥25mm,间隙(直径差)ic≤0.15mm。 7、防爆投光灯外壳在明显处应设有清晰、*性的凸纹标志“ExdⅡBT4”或“ExdⅡCT4”。 8、防爆投光灯隔爆面涂204-1置换型防锈油。 9 、防爆投光灯外壳外表面涂银灰色粉末漆,并应满足户外要求。 10、防爆投光灯的铭牌采用黄铜板或不锈钢制造。 11、防爆投光灯的电气间隙不小于5mm,爬电距离不小于6.3mm,螺口式灯座和灯头的爬电距离和电气间隙不小于3㎜。 12、防爆投光灯应在明显处设置“严禁带电开盖”的警告标志。 BAT51-G适用范围 Applications 1.1区、2区危险场所或20区、21区、22区危险场所; 2.ⅡA、ⅡB、ⅡC爆炸性气体环境或可燃性粉尘环境; 3.户内、户外(IP54、IP65*); 4.温度组别:T1~T4/T5/T6; 5.注:当用作增安型时,不配钠灯。 6.应用于石油、化工、航天、*等场所。 | 1.Hazardous:division 1 &2,or 20,21,&22; 2.Explosive gas atmosphers: classⅡA ⅡB ⅡC or inflammable dust environment; 3.Indoor or outdoor(IP54,IP65*); 4.Temperature class:T1~T4/T5/T6; 5.Note: If of safety-increased type, it is not suitable for sodium vapor lamp. 6.Widely using in the fields of oil ,Chemical industry, spaceflight, war ind-ustry and so on. |
BAT51-G产品特点 Features 1.外壳采用不锈钢拉伸成型,外形美观。 2.采用和合式快速开启结构,更换灯泡方便,密封可靠。具有较强的防水、防尘、防腐功能。 3.钢管布线。 1.The shell stretch-formed by stainless steel with aesthetic appearance. 2.Use buckle type fist opening up structure, which is convenient for changing bule, sealed reliably and having the functions of strong water-proof, dust-proof, corrosion-proof. 3.Conduit wiring. BAT51-G主要技术参数 Main technical parameters |