污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料
北京艾诺德仪器有限公司
北京艾诺德仪器有限公司
采用技术，满足现行国家标准，符合GB/T5169.12-2006/IEC 60695-2-12:2000，用于对电工电子产品家电及其材料等进行着火危险试验的*仪器，是检测墙壁开关、多功能插头、插座、漏电保护器，电流、电压表外壳检测的理想仪器。
灼热丝燃烧试验仪
产品名称：灼热丝燃烧试验仪
产品型号：ZRS-A
满足标准：GB/T5169.12-2006/IEC 60695-2-12:2000
电工电子产品着火危险试验第10部分：灼热丝热丝基本试验方法
灼热丝装置和通用试验方法
产品概述：
采用技术，满足现行国家标准，符合GB/T5169.12-2006/IEC 60695-2-12:2000，用于对电工电子产品家电及其材料等进行着火危险试验的*仪器，是检测墙壁开关、多功能插头、插座、漏电保护器，电流、电压表外壳检测的理想仪器。
技术参数：
1、灼热丝：?4mm±0.04mm，Ni/Cr(成分比例80/20)特制标准环形，卧式静置，热电偶：?1.0mm，K型，英国进口绝缘式耐高温铠装热电偶，铠装套耐热1200℃(优于标准 1050℃)所有仪表关键元器件均采用进口及国产！
2、灼热丝通电加热温度：100℃～1050℃(数显可预置)，温度波动<5℃（优于标准）
3、试品对灼热丝试验压力：1.0N±0.1N(优于标准1.0N±0.2N)
4、zui大烫入深度：7mm±0.5mm(可调节)
5、试品移动速度：10mm/s～25mm/s
6、试验时间：30s±0.1s(1s～999.9s数显可预置)
7、引燃铺垫板厚：采用厚10mm的白松木板外覆标准绢纸（12g/m2～30g/m2），放置于离灼热丝下200mm±5mm
8、燃烧试验区容积0.5立方，背景黑色，背景照度≤20Lux，排气孔：?100mm
9、外形尺寸约：1160×550×1050(宽*深*高) mm
10、电源功率：1kVA/220V/50Hz
产品特点：
1. 过温度自检功能，当温度过高大于灼热丝安全温度1050度时，报警器报警，提示操作人员温度下调。
2. 实验过程中，当达到设定的灼热时间时，加热电压自动断开，实验小车自动离开，脱离灼热丝。
3. 温度调节稳定，易于控制。
关于更多 灼热丝燃烧试验仪 详细资料请您
Glow wire test apparatus
Product Name: glow wire test apparatus
Product type: ZRS-A
Meet the standards: GB/T5169.12-2006/IEC 60695-2-12:2000
Fire hazard testing - Part tenth: Basic test for electric and electronic products glow wire hot wire method
Glow wire device and the general test method
Product overview:
Using the latest technology, to meet the current national standard, according to GB/T5169.12-2006/IEC 60695-2-12:2000, an essential instrument for fire hazard testing for electric and electronic products such as home appliances and materials, is to detect the wall switch, multi function plug, socket, electrical leakage protector, the ideal instrument electric current, voltage meter casing detection.
Technical parameters:
1, glow wire:? 4mm ± 0.04mm, Ni/Cr (proportion 80/20) special standard circular, horizontal static, thermocouple:? 1.0mm, K, the British imported insulation type high temperature resistant armoured thermocouple, armoured units heat 1200 ℃ (better than the standard 1050 ℃) all the instruments of key components are imported and domestic brands!
2, hot wire electric heating temperature: 100 ℃ ~ 1050 ℃ (digital display can be preset), fluctuation of temperature <5 ℃ (than)
3, the sample on the glow wire test pressure: 1.0N ± 0.1N (better than the standard 1.0N + 0.2N)
4, the maximum hot depth: 7mm ± 0.5mm (adjustable)
5, specimen moving speed: 10mm/s ~ 25mm/s
6, the test of time: 30s ± 0.1s (1s ～ 999.9s display can be preset)
7, igniting the lay plate thick: the board covered with standard silk paper thickness 10mm (12g/m2 ~ 30g/m2), placed on the left under the hot wire 200mm ± 5mm
8, the combustion zone volume 0.5 cubic meters, black background, background illumination ≤ 20Lux, exhaust hole: 100mm?
9, overall dimensions: 1160 x 550 x 1050 (w * D * h) mm
10, power: 1kVA/220V/50Hz
Product features:
1 temperature self checking function, when the temperature is greater than the hot wire temperature 1050 degrees, alarm, prompting temperature operators cut.
2 in the course of the experiment, when the set of burning time, heating voltage automatic shutdown, automatic experimental car left, away from the glow wire.
3 temperature control stability, easy control.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
