电动球阀适用于两位切断、调节的场合。阀与执行机构的连接采用直连方式，由 UNIC、PSQ、HQ、DHL等电动执行器（也可根据用户要求配置其他型号电子式电动执行机构）与超短球阀组成。电动执行机构内置伺服系统，无须另配伺服放大器，输入 4-20mA 信号及 220V AC 电源即可控制运转。和普通电动球阀相比具有结构紧凑，体积小，重量轻，阀座与端面法兰距离近，物料滞留少，密封性能优越等特点。
性能参数
型号 | PN | 工作压力 / MPa | 适用温度 / ℃ | 适用介质 |
Q941F-16C | 16 | 1.6 | ≤ 180 | 水、气、油 |
Q941F-25C | 25 | 2.5 | ||
Q941F-40C | 40 | 4 | ||
Q941Y-16C | 16 | 1.6 | ≤ 425 | 水、气、油含颗粒介质 |
Q941Y-25C | 25 | 2.5 | ||
Q941Y-40C | 40 | 4 | ||
Q941F-16P | 16 | 1.6 | ≤ 180 | 硝酸类 |
Q941F-25P | 25 | 2.5 | ||
Q941F-40P | 40 | 4 | ||
Q941Y-16P | 16 | 1.6 | ≤ 450 | 水、气、油含颗粒介质 |
Q941Y-25P | 25 | 2.5 | ||
Q941Y-40P | 40 | 4 | ||
Q941F-16R | 16 | 1.6 | ≤ 180 | 硝酸类 |
Q941F-25R | 25 | 2.5 | ||
Q941F-40R | 40 | 4 | ||
Q941Y-16R | 16 | 1.6 | ≤ 450 | 水、气、油含颗粒介质 |
Q941Y-25R | 25 | 2.5 | ||
Q941Y-40R | 40 | 4 | ||
Q941F-16I | 16 | 1.6 | -29~150 | 水、蒸汽、气体、油品等 |
Q941F-25I | 25 | 2.5 | ||
Q941F-40I | 40 | 4 | ||
Q941F-63I | 63 | 6.3 |
产品零部件材料
型号 | 材料 | |||
阀体 | 阀杆 | 密封面 | 填料 | |
Q941F-16C | WCB | 2Cr13 | PTFE、增强 PTFE | PTFE |
Q941F-25C | 304 | |||
Q941F-40C | 316 | |||
Q941Y-16C | 1Cr18Ni9Ti | 金属堆焊钴基 | 柔性石墨 | |
Q941Y-25C | 1Cr18Ni12Mo2Ti | |||
Q941Y-40C | ||||
Q941F-16P | CF8 | 304 | PTFE、增强 PTFE | PTFE |
Q941F-25P | ||||
Q941F-40P | ||||
Q941Y-16P | 金属堆焊钴基 | 柔性石墨 | ||
Q941Y-25P | ||||
Q941Y-40P | ||||
Q941F-16R | CF8M | 316 | PTFE、增强 PTFE | PTFE |
Q941F-25R | ||||
Q941F-40R | ||||
Q941Y-16R | 金属堆焊钴基 | 柔性石墨 | ||
Q941Y-25R | ||||
Q941Y-40R | ||||
Q941F-16I | 合金钢 | 不锈钢 | — | — |
Q941F-25I | ||||
Q941F-40I | ||||
Q941F-63I | ||||
环保在线