金盾没有气味无异味kd-888快干胶> kd-888 快干胶是专为无气味结合的要求和高强度单组分的研究与开发胶、高性能、抗老化性能优异，非常适合连续生产线。
KD-888 quick-drying glue is designed for the combination of non-odor requirements and high-strength single-component research and development of special plastic, high performance, excellent anti-aging performance, very suitable for continuous production line.
kd-888无味快干胶：金属，塑料，陶瓷，粘结瓷、工艺品、瓷砖、大理石、花岗岩、ivory石、水晶石、木材、橡胶、仪表、电器、皮革等多种产品，广泛应用于五金、家具、陶瓷、机械、显示、显示电子、仪器、汽车、造船、纺织、建筑、化工胶粘剂领域。
Wood, rubber, instrumentation, electrical appliances, leather and other products, widely used in hardware, metal, plastic, ceramic, handicrafts, tiles, marble, granite, ivory stone, crystal stone, wood, rubber, , Furniture, ceramics, machinery, display, display electronics, instrumentation, automotive, shipbuilding, textile, construction, chemical, aerospace and medical adhesives.
说明> 1、PP、硅胶、PE、TPU、POM等惰性塑料和金属表面处理剂，需要塑料表面擦一遍，用kd-770处理，提高胶料的表面惰性材料吸收性能；<br / > 2、处理剂挥发（一般在10秒的粘接材料，结束后60分钟，随着时间的推移，需要重新处理）再涂上适当的（粘结面积小，可在套筒前端的进胶瓶针或导管，以控制胶量）kd-888胶水；> 3，室温下为二十秒可以初步固定。30分钟至24小时的使用强度，*贴合！4、ABS、PS、PC、PPS、PA、GA等塑料和金属粘接，无需加工，一般在6-8秒定位，5分钟左右，即能达到很强的强度，2小时即可投入使用。
1, PP, silicone, PE, TPU, POM and other inert plastic and metal surface treatment agent, the need for plastic surface wipe again, with kd-770 treatment to improve the surface of the material inertia material absorption performance; <br /> 2, (Usually over 10 minutes after the end of the sleeve) Catheter to control the amount of glue) kd-888 glue;> 3, at room temperature for 20 seconds can be initially fixed. 30 minutes to 24 hours of use of strength, fully fit! 4, ABS, PS, PC, PPS, PA, GA and other plastic and metal bonding, no processing, generally 6-8 seconds positioning, 5 minutes or so, that can achieve a strong strength, 2 hours can be put into use.
