污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料
深圳市维信仪器仪表有限公司
深圳市维信仪器仪表有限公司
AEM适应试产需求，推出全新一代OTDR光时域反射计，极小的盲区，大动态范围，支持局域网、
AEM OTDR光时域反射计
AEM适应试产需求，推出全新一代OTDR光时域反射计，极小的盲区，大动态范围，支持局域网、城域网光缆的故障定位和损耗测试，下面我们来一睹新一代AEM OTDR的风采。
以下为英文介绍资料，请酌情参考。
Tier 1-Optical Loss Testing
Tier 1 Certification-Optical Loss Testing
In its simplest form and optical loss testing is a comparison between the optical power measured in dBm at the output of the light source and the power measured at the far end of a fiber connected to that same light source.The difference is known as loss or attenuation,expressed in dB.
Combining the light source/power meter,measuring against standards and providing a pass/fail is known as an Optical Loss Test Set.
AEM OTDR光时域反射计
Tier 2 Testing
TIA-568:Optical Fiber Cabling and Components Standard
Tier 2 testing supplements Tier 1 testing with the addition of an OTDR characterization of the elements along the fiber cabling.
Simply put,Tier 2 is just testing the same fiber with an OLTS and an OTDR and documenting the results of both.
AEM OTDR光时域反射计
AEM OTDR Specifications
Available wavelengths
MM 850nm/1300nm
SM 1310nm/1550nm
Event dead zone
0.5m to 0.7 depending on wavelength
Attenuation dead zone
2.5m to 4.5m depending on wavelength
Dynamic Range
25dB 850nm/27dB 1300nm
29dB 1310nm/27dB 1550nm
Distance Measurement Range
9km for 850nm,35km for 1300nm
80km for 1310nm,130km for 1550nm
Pulse Width
3,5,10,15,…,24995,25000 nsec
Individual adapters AD-OTDR-SM/AD-OTDR-MM are boxed and include 1 each of:
SC interface
2m SC-SC TRC(“connector protectors")
LC&SC coupler
1.25mm&2.5mm connector cleaners
AEM OTDR光时域反射计
Standalone OTDR kits/combination kits K21E/K41E/K71E include a hard case.
Launch cords are included ONLY with the Tier 1/Tier 2 combination kit K41E and the Smart Building Max kit K71E and must be purchased separately for all other configurations.
AEM OTDR光时域反射计
AEM OTDR光时域反射计
Tier 2 Testing
TIA-568:Optical Fiber Cabling and Components Standard
Tier 2 testing supplements Tier 1 testing with the addition of an OTDR characterization of the elements along the fiber cabling.
Simply put,Tier 2 is just testing the same fiber with an OLTS and an OTDR and documenting the results of both.
以下为英文介绍资料，请酌情参考。
Tier 1-Optical Loss Testing
Tier 1 Certification-Optical Loss Testing
In its simplest form and optical loss testing is a comparison between the optical power measured in dBm at the output of the light source and the power measured at the far end of a fiber connected to that same light source.The difference is known as loss or attenuation,expressed in dB.
Combining the light source/power meter,measuring against standards and providing a pass/fail is known as an Optical Loss Test Set.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
