高温导热油泵 ※常州市武研热油泵有限公司※ 泵的开机准备：检查电机转向是不是与泵旋转方向*。用手搬动联轴器泵应该能灵活转动。开车前应使用所输送的导热油将高温导热油泵灌满，目的是驱除高温导热油泵中的空气，这时吐出口管道上的R的阀门要关闭。所输送的导热油在开车前要均匀加热，预热是利用被输送的导热油不断通过泵体进行的，要避免温度的剧烈波动，如果发现有异常情况，要立即停机检查。开车前还要检查基础及螺栓有没有松动，密封是否正常。Pump preparation: check the steering motor and pump rotation direction Is it right?. Move by handpump coupling should be flexible rotation. Before driving should be used for the transport of heat conducting oil will heat conducting oil pump filled, the purpose of which is to get rid of the heat conducting oil pump in the air, then spit on the outlet pipe of the R valve to close. The transport of heat conducting oil before driving to uniform heating, preheating is continuously through the pump body of using heat conduction oil is transported, to avoid temperature fluctuations, if it is found that the abnormal situation to immediay stop check. Also check before driving and there are no loosebolts, the sealing is normal.
常州市武研热油泵有限公司
地 址：常州市武进区横林镇横玉路247号
销 售：,
售 后：
传 真：
手 机：
: 876363125
邮 箱：WRY@vip.163.com
常州热油泵：www.wry006。。ｃｏｍ
WRY热油泵：www.wry002。。ｃｏｍ
热油泵配件：www.wry008。。ｃｏｍ
离心式热油泵：www.wry003。。ｃｏｍ
友情链接：耐腐蚀化工泵 www.wyryb。。ｃｏｍ
锅炉辅机：www.whboiler。。ｃｏｍ
刮板出渣机：www.cz-boiler。。ｎｅｔ
主动/被动炉排片：www.glfj。。ｎｅｔ
提升式上煤机：www.wh-boiler。。ｃｏｍ
武研导热油泵：http://wrypump.cn.alibaba.com
锅炉辅机配件：http://glboiler.cn.alibaba.com
2015.6.2张
