橡胶塑料薄膜电压强度测试仪BDJC-50KV
Rubber plastic membrane voltage strength tester BDJC - 50 kv
橡胶塑料薄膜电压强度测试仪BDJC-50KV主要配置：
1.主机一台
2.（高精度滚珠丝杠，高强度光杠，中国台湾精密电机及伺服系统）
3.高精度S 型传感器一只（1000N）
4.拉伸夹具两只（具体类型可按用户试验情况确定）
5.单片机控制器一个（液晶中文显示）
Rubber plastic membrane voltage strength tester BDJC - 50 kv main configuration:
1. Host a
2. (high precision ball screw, high strength and light poles, Taiwan precision motors and servo system)
3. High precision a S type sensor (1000 n)
4. Drawing fixture two (as defined by the user test specific types can)
5. Single chip microcomputer controller a (liquid crystal display in Chinese)
BDJC-50KV技术参数：
1.测力精度：示值的±1％ （可选±0.5％）
2.测力分辨率：1/30000
3.试验速度：0.05——500 mm/min
4.速度精度：示值的±1％ （可选±0.5％）
5.变形精度：±0.5％（FS）
6.有效拉伸空间：≥850 mm（具体尺寸也可按用户要求扩展）
7.有效试验宽度：400 mm 550 mm（具体尺寸也可按用户要求扩展）
8.超载保护功能：超过额定负荷10％自动保护
9.试台安全装置：电子限位保护
10.试台返回功能：试验结束后自动或手动返回试验初始位置
Rubber plastic membrane voltage strength tester BDJC - 50 kv technical parameters:
1. The force measurement accuracy: + / - 1% of the value (optional + / - 0.5%)
2. Strain resolution: 1/30000
3. The test speed: 0.05-500 mm/min
4. Speed accuracy: + / - 1% of the value (optional + / - 0.5%)
5. The deformation accuracy: plus or minus 0.5% (FS)
6. Effective tensile space: 850 mm or higher (specific size can also be expanded according to the requirements of customers)
7. Effective test width: 400 mm to 550 mm (specific size can also be expanded according to the requirements of customers)
8. The overload protection function: more than 10% of the rated load automatic protection
9. Try machine safety devices: electronic limit protection
10. Try a return function: test automatically or manually after the return to the initial position
BDJC-50KV注意事项：
●本仪器试验过程中如空气相对湿度大于70%，两电极间空气放电的距离会增加很多，所以试验中请与仪器保持1.2米的距离。
●本仪器之控制计算机专为电压击穿试验机设计，请勿随意添加和删除程序或移作它用。
●本公司保留对设备改进的权利，并不另行通知用户。
注： 其它未尽事宜请，我们将竭诚为您服务。
Rubber plastic membrane voltage strength tester BDJC - 50 kv to note:
When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot, so test instrument to keep a distance of 1.2 meters.
When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.
The company reserves the right to equipment improvement, did not notice the user.
Note: other matters not mentioned herein, please contact us, we will serve you wholeheartedly.
：
