美国DAKOTA MX-5DL超声波测厚仪|手持式超声波测厚仪
The MX-5 DL is a simple to operate Ultrasonic Thickness Gauge with an internal data logger. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5 DL. The MX-5 DL will automatically log your readings in numeric order ( 1 to 1000 readings ). Use our DakView java-based utility software for PC or MAC OSX. The gauge comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.
美国DAKOTA MX系列超声波测厚仪是美国DAKOTA ULTRASONICS公司推出的新一代超声波测厚仪。具有使用简单，功能齐全，体积小巧，可靠性高等特点。
MX-5DL超声波测厚仪除了具有MX-5超声波测厚仪的全部功能外，还增加了存储功能，可存储1000个测量数据。仪器还附带有通讯电缆和软件，可将数据传送到计算机上。
技术参数
测量范围：0.63～500mm(钢，取决于探头)
显示精度：0.01mm
探头频率：1MHz～10MHz
显示方式：4位半数字液晶显示，带背光
校准：对话式探头，自动校准
声速范围：1250～10000m/s
扫描方式：每秒测量16个点，可以捕捉到zui薄点
电源：2节5号电池。连续使用时间达200小时，当电池供电不足时，显示器会闪烁报警，直至自动关机
键盘：6键防水、防油键盘
操作温度：-20℃～50℃
尺寸：63.5x114.3x31.5mm
重量：300g
包装：ABS工程塑料箱
常用探头
型号 | 频率 | 晶片直径 | 接触直径 | 测量范围 | 说明 |
PT-102-2000 | 5.0MHz | φ6.3mm | φ9.5mm | 1.0～150mm | 标准探头 |
PT-101-2000 | 5.0MHz | φ4.7mm | φ6.3mm | 1.0～50mm | 小管径探头 |
PT-104-0000 | 1.0MHz | φ12.7mm | φ15.9mm | 3.8～50.8mm(铸铁中) | 铸铁探头 |
PT-102-1000 | 2.25MHz | φ6.3mm | φ9.5mm | 1.52～100mm | 低频探头 |
PT-102-3300 | 7.5MHz | φ6.3mm | φ9.5mm | 0.63～150mm | 超薄探头 |
PT-104-2000 | 5.0MHz | φ12.7mm | φ15.9mm | 1.27～500mm | 超厚探头 |
PT-042-2000 | 5.0MHz | φ6.3mm | φ9.5mm | 1.0～150mm | 高温探头，zui高340℃ |
PT-044-2000 | 5.0MHz | φ12.7mm | φ15.9mm | 1.27～500mm | 高温探头，zui高340℃ |
PT-212-2001 | 5.0MHz | φ6.3mm | φ9.5mm | 1.0～150mm | 高温探头，zui高480℃ |
| PT-214-2001 | 5.0MHz | φ12.7.3mm | φ15.9mm | 1.27～500mm | 高温探头，zui高480℃ |
MEASURING
- Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
- Switch to select English or metric units.
- Resolution: 0.001 inch (0.01 millimeter)
- Velocity Range: .0492 to .3937 in/m s
1250 to 10,000 meters/sec - Built-in: Stainless steel reference disk for probe zeroing.
- Four readings per second for single point measurements or 16 per second in SCAN mode.
- Single and Two point calibration option included.
FEATURES
- Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
- Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red LED will illuminate and sound beeper. If measurement is above minimum value, green LED will illuminate.
- Data Ouput: RS232 output sends thickness readings to a printer, computer or other external storage device.
- POWER SOURCE
- Two 1.5V alkaline or 1.2V NiCad AA cells.
- Typically operates for 200 hours on alkaline and 130 hours on NiCad.
- Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
DISPLAY
- Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
- Backlight is selectable: on/off/auto illuminates only when taking a measurement.
- Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
- Bar graph indicates stability or reading.
CERTIFICATION
- Factory calibration traceable to national standards.
WARRANTY
- 5 year limited.
PHYSICAL
- Weight: 10 ounces
- Size: 2.5 W x 4.75 H x 1.25 D inches
63.5 W x 120.7 H x 31.8 D mm - Operating Temperature: -20 to 120F (-20 to 50C)
- Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.
KEYPAD
- Sealed membrane that is resistant to both water and petroleum products.
- Nine tactile-feedback keys.
TRANSDUCER
- Dual element (transmit and receive)
- 1 to 10 MHz frequency range.
- Locking quick disconnect LEMO connectors
- 4 foot cable
- Optional cable lengths up to 100 feet.
- Custom transducers available for special applications
DATA LOGGER
- Automatic numeric Data Logging system 1 to 1000 readings.
