D/A mfg PRGM7-TV-SS-AF1F2-6-GP3FU-CV-F2
D/A mfg PRGM7-TV-SS-AF1F2-6-GP3FU-CV-F2
深圳市扎克贸易张瑞 TEL：18824-24-30-80
询价Q：3061671820
| Choose from one of the 4 product categories described below or if you know what D/A catalog model number you are looking for, use this quick finder to locate it. Model Number DIAL-A-FUNCTION MODELSZM6MM4BMM4BFMM6ATSBZ43MM4UMM6UCPTM4UPTM6UCPTM6PG6BK6 SAFTI-FOLD MODELSSF3ATSF3T4CSF3TCSF3FCSF3TUSF3FUSF5BUSF2PTMUSF2PTMSFPGSFBK GENERAL PURPOSE MODELS********GP3TUGP3FUGP5TUGP5FUGP5TUITVGP3T4CGP3TCGP3FCGP5T4CGP5TCGP5FCGP3ATGP5ATGP2LLMTU GP2LLMT4CGP2LLMTCGP2LLMFCGPPGGPHVGP2PTMUGP2PTMFUGP2PTMT4CGP2PTMTCGP2PTMFCGP2PTMGP1PTMGP2PTMFSGP2PTMFD ACCESSORIESAdapter FlangesPRGM Purge SystemRod-Out SystemIOS6 Integral Orifice System |
 A new generation of manifolds that reduce downtime caused by human error (improper positioning or sequencing of the valves). Dial-A-Function® automatically positions and sequences the valves to help protect the transmitter from damage and the plant from inaccurate measurement control. |  MM6UC Shown |
 The safest, most dependable and durable line of instrument manifolds and valves. Safti-Fold® valves help protect the plant, process, operator and environment from process blowout, uncontrollable leakage and non-operation. Safti-Fold® Design Features Demo |  SF3TC Shown |
 A completely new line of superior designed manifold valves. This valve features bottom-loaded spring packing, which controls fugitive emissions and leaks. The bonnetless valve assembly eliminates safety hazards due to broken off or unscrewed bonnets. An ultra-hard ceramic-to-metal seat eliminates ball creasing and seat galling. General Purpose Design Features Demo |  GP5FU Shown |
 D/A adapter flanges, PRGM purge system, rod out systems and integral orifice systems complement D/A's superior designed instrument manifolds and valves. | |
D / A制造： 更聪明的想法.....更好的工程
仪表阀和歧管的完整产品线包括：
- 差压阀歧管
- 压力变送器和表阀歧管
- 多通量表阀，截止阀和配件
超过20年的经验支持为苛刻和关键服务应用设计的设计
| |
D / A制造： 更聪明的想法.....更好的工程 仪表阀和歧管的完整产品线包括：
超过20年的经验支持为苛刻和关键服务应用设计的设计 Hastelloy C＆B，Monel，Alloy 20等可提供特殊材料的仪表阀和歧管 | |
 Shown Here: PRGM7 mounted to a GP3FU Manifold |
| Modes of Operation |
| PURGE ON Shown with the Function Selector Handle * turned to "PURGE ON" and both service valves turned to "NORMAL". This is the NORMAL run mode.
|
| TEST Shown with the Function Selector Handle * turned to "PURGE ON" and the left service valve turned to "TEST".When either of the service valves are turned to "TEST", the discharge of that flow cartridge is blocked downstream of the pressure indicator (PI). This "PI" was indicating process pressure, but it will now increase to indicate the purge inlet pressure as flow continues through the flow cartridge. The rate of pressure rise is a direct indication of flow rate through the cartridge; thus, serving as a good, positive indicator of two things: 1) Is the cartridge plugged? and 2) Is the purge and process pressure differential large enough? If a more accurate indication of the flow rate is desired, open the vent valve to bring the (PI) down to zero pressure. Then close the vent valve and time how long it takes the flow cartridge to bring the (PI) back up to purge line pressure. Since the purge header pressure is constant throughout the plant, this recharge time should be fairly constant. This vent and recharge procedure can also be used to try and clear a restricted flow cartridge. If it does not clear, then dial "PURGE OFF", vent off the pressure, and replace the cartridge.
|
| PURGE OFF & TEST Shown with the Function Selector Handle * turned to "PURGE OFF" and both service valves turned to "TEST".This is the mode used to remove or replace a flow cartridge or pressure gauge. Use the vent system to bleed off ALL pressure prior to removing a cartridge or gauge.
|
| FAST PURGE Shown with the Function Selector Handle * turned to "FAST PURGE" on the left side. Mirror image results are obtained by dialing to the right side.This mode is used to blast the tap lines clean. It is necessary to go on manual control before doing a fast purge. The most common need for this mode is to remove a liquid trap from within a vapor purge system. It is also used to remove sediments that may have collected in the line during a purge system failure.
|
| Specifications | ||
| Max Ratings: Teflon®: 2500psi @ 100°F 1500psi @ 220°F *Ryton: 2500psi @ 220°F 1500psi @ 520°F * DO NOT USE BELOW 200°F | Material: All wetted and exposed parts are 316SS Codes: Barstock, A479 - 316, A276-316; Cast, ASTM-A743 CF3M, ASTM-A-351 CF3M, A 276-316. | Design Codes: ANSI B31.1, B16.5, NACE MR-01-75 (special order) |
| Spare Parts | |||
| Part Description: | Part Number: | Part Description: | Part Number: |
| Flow Cartridge # 2 Flow Cartridge # 4 Flow Cartridge # 6 Flow Cartridge # 8 Ryton Face Seal (PRGM7 Only) | TSOFLOW2MZ TSOFLOW4MZ TSOFLOW6MZ TSOFLOW8MZ H80AMA02PZ | Viton® O-ring Cart. Seat Seal Teflon® O-ring Cart. Seat Seal Viton® O-ring Cart. Seal Teflon® O-ring Cart. Seal | D71AAA05PZ D70AAA05PZ D71AAA06PZ D70AAA06PZ |
Viton® is a registered trademark of DuPont Dow Elastomers.
Teflon® is a registered trademark of DuPont.
 | |||||||||
| Code | Model | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| PRGM6 | Single Purge Assembly | ||||||||
| PRGM7 | Double Purge Assembly | ||||||||
| | | Code | Seals | |||||||
| | | TT | Teflon® / TFE O-Rings | |||||||
| | | TV | Teflon® / Viton® O-Rings | |||||||
| | | RV | Ryton / Viton® O-Rings | |||||||
| | | | | Code | Material | ||||||
| | | | | SS | Stainless Steel, 316 | ||||||
| | | | | | | Code | Connections | |||||
| | | | | | | Outlet | Inlet | Description | ||||
| | | | | | | AF1 | F2 | Flanged Outlet to Manifold x 1/4" FNPT Inlet | ||||
| | | | | | | PRGM6 Only | ||||||
| | | | | | | F2 | F2 | 1/4" FNPT Outlet (No Manifold) x 1/4" FNPT Inlet | ||||
| | | | | | | | | | | Code | Flow Capsule Size | |||
| | | | | | | | | | | #2 | 3.2 SCFH Air @ 10 Psi | |||
| | | | | | | | | | | #4 | 1.0 SCFH Air @ 10 Psi | |||
| | | | | | | | | | | #6 | .40 SCFH Air @ 10 Psi | |||
| | | | | | | | | | | #8 | .10 SCFH Air @ 10 Psi | |||
| | | | | | | | | | | | | Code | Gauges (optional) leave blank if not required | ||
| | | | | | | | | | | | | 3 | 0-16 KG/CM² Stainless Steel | ||
| | | | | | | | | | | | | 5 | 0-40 KG/CM² Stainless Steel | ||
| | | | | | | | | | | | | 7 | 0-200 Psi Stainless Steel | ||
| | | | | | | | | | | | | 8 | 0-1000 Psi Stainless Steel | ||
| | | | | | | | | | | | | | | Code | Manifold (PRGM7 Only) | |
| | | | | | | | | | | | | | | GP3FU | GP3FU-T-SS 3-Valve Manifold | |
| | | | | | | | | | | | | | | | | Code | Options |
| | | | | | | | | | | | | | | | | CV | Check Valve Stainless Steel |
| | | | | | | | | | | | | | | | | PRGM6 Only | |
| | | | | | | | | | | | | | | | | MB | Mounting Bracket Kit for 2" pipe |
| | | | | | | | | | | | | | | | | PRGM7 Only | |
| | | | | | | | | | | | | | | | | F2 | 1/4" FNPT GP3FU Outlet (Flange Std.) |
| | | | | | | | | | | | | | | | | | | |
| Model Number | |||||||||
SWAGEIOK PRGM6-TV-SS-F2F2-#6-8B-CV-MB
PRGM7-TV-SS-AF1F2-#4-8BGP3FU-T-SS-3-valve monifold-CV-F2
SWAGEIOK PRGM6-TV-SS-F2F2-#6-8B-CV-MB
PRGM7-TV-SS-AF1F2-#6-8BGP3FU-T-SS-3-valve monifold-CV-F2
PRGM6-TV-SS-F2F2-#6-8-CV-MB
PRGM7-TV-SS-AF1F2-#-8-8-GP3FU-CV
PRGM7-TT-SS-AF1F2
PRGM7-TV-SS-AF1F2-#6-GP3FU-CV-F2
PRGM7-TV-SS-AF1F2-#4-GP3FU-CV-F2
PRGM6-TV-SS-AF1F2-#6-CV
PRGM6-TV-SS-AF1F2-#2-CV
d-a-mfg / PRGM7-TV-SS-F2F2-#2-5
d-a-mfg / PRGM7-TV-SS-AF1F2-#2-8
d-a-mfg / PRGM7-TV-SS-AF1F2-#6-8
d-a-mfg / PRGM7-TV-SS-AF1F2#6-5-GP3FU-CV
d-a-mfg / prgm7-tv-ss-af1f2-#6
d-a-mfg / PRGM7-TV-SS-F2F2-#2-5
d-a-mfg / PRGM7-TT-SS-AF1F2-#2-GP3FU
d-a-mfg / PRGM6-TT-SS-F2F2-#6
d-a-mfg / PRGM6-TT-SS-AF1F2-#6-CV气动传动阀Pneumatic transmission d-a-mfg / D70AAA05PZ-d-a-mfg / PRGM6-TT-SS-F1F2-#6
d-a-mfg / PRGM7-T-SS-AF1F2-#6
d-a-mfg / PRGM7-TT-SS-AF1F2-#6-CV气动传动阀
d-a-mfg / PRGM7-TV-SS-AF1F2-#6
d-a-mfg / PRGM7-TV-SS-AF1F2-#8-8-GP3FU-CV-
d-a-mfg / PRGM6-TT-SS-F2F2-#6-7-CV
d-a-mfg / D70AAA06PZ
d-a-mfg / PRGM7-TT-SS-AF1F2-#6-GP3FU
d-a-mfg / PRGM7-TV-SS-AF1F2-#2
d-a-mfg / 2 PRGM7-TT-SS-AF1F2-#6-GP3FU
d-a-mfg / PRGM6-TT-SS-F2F2-#6-5-CV-MB
