润滑脂防腐蚀性实验仪JSH5801

产品型号：JSH5801

产品名称：润滑脂防腐蚀性实验仪JSH5801

产品说明：

JSH5801润滑脂防腐蚀性实验仪

一、符合GB/T5018标准

二、主要技术参数

型号规格： JSH5801

电机转速： 1450转／分钟

功    率： 200W

工作电源： AC220V±10%  50Hz

外形尺寸： 240×220×540 mm（长×宽×高）

整机重量： 15Kg

三、试验方法概要：

1、本方法是将涂有试样的新轴承，在轻的推力负荷下运转60秒钟，使润滑脂像使用情况那样分布。轴承在52±1℃，相对湿度下存放48小时。然后清洗并检查轴承外圈滚道的腐蚀迹象。

2、本方法中腐蚀是指轴承外圈滚道的任何表面损坏（包括麻点、刻蚀、锈蚀等）或黑色污渍。

JSH5801 grease anticorrosion tester

I. Comply with GB/T5018 standard

Ii. Main technical parameters

Model specification: JSH5801

Motor speed: 1450 RPM

Power: 200 w

Power supply: AC220V±10% 50Hz

Dimensions: 240×220×540 mm (length × width × height)

Machine weight: 15Kg

Iii. Summary of test methods:

1. The method is to apply a new bearing coated with a sample to run for 60 seconds under a light thrust load, so that the grease is distributed as it is used. The bearings were stored at 52±1℃ and relative humidity for 48 hours. Then clean and inspect the bearing outer ring raceway for signs of corrosion.

2. In this method, corrosion refers to any surface damage (including pitting, etching, rust, etc.) or black stains on the raceway of the outer ring of the bearing.