LR 1000 control System
The LR 1000 control is a cost efficient, modular laboratory reactor designed to optimize chemical reaction processes as well as for mixing, dispersing and homogenization tasks on a lab scale particularly in the cosmetic and pharmaceutical industry. The system can be adapted quickly and easily to a wide range of applications and specific requirements.
Prominent features are its intuitive menu navigation, integrated pH and temperature sensor connection as well as several interfaces that allow display and storage of process-relevant data on a PC. By using the laboratory software labworldsoft® (accessory) it is possible to even control the reactor via PC and make further settings. In addition, a control valve connection to attach a magnetic valve (accessory) for program-based cooling water control is integrated.
The medium can be heated either to a fixed maximum temperature of 120 °C or to a set temperature by the heater at the bottom of the vessel. A temperature sensor inside the medium ensures that the set temperature is reached. Both, a PT 100.30 temperature sensor and the corresponding receptacle LR 1000.61 for the lid are included in the delivery.
- Components in contact with medium: stainless steel (ALSI 316 L), FFKM, PTFE, PEEK, borosilicate glass 3.3
- Large easy to read TFT display for easy menu navigation
- Integrated control valve connection to attach a magnetic valve (accessory) for program-based cooling water control
- Integrated weighing function
- Torque trend measurement indicates changes in product viscosity
- Integrated pH sensor connection
- RS 232 and USB interface to operate the unit with the laboratory software labworldsoft
- Standard joint fittings on the lid: 2 x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment
- Expandable for use with the ULTRA-TURRAX® T 25 digital (accessory)
- Vacuum valve included in delivery
- Anchor stirrer with PTFE-scrapers
- Connections to attach a cooling source to the back of the unit
- Manual adjustable safety circuit
- Integrated safety shutdown when vessel or lid is removed from the base
技术参数
| 使用容积 | 1000 ml |
| 带分散刀具的最小样品处理量 | 500 ml |
| 工作温度 | 120 °C |
| 可达到真空 | 25 mbar |
| 粘度 | 100000 mPas |
| 速度范围 | 10 - 150 rpm |
| 支杆直径(含集成固定支架) | 16 mm |
| 物料接触部分材料 | AISI 316L, 1.4571, 硼硅盐玻璃 3.3, PTFE, PEEK, FFKM |
| 反应容器开口(件数/标准) | 2x NS 29/32, 2x NS 14/23 & 2x GL 14 |
| 允许连续运转时间 | 100 % |
| 温度测量精度 | 0.1 K |
| 额定转矩 | 3 Nm |
| 加热输出功率 | 1000 W |
| 冷却介质允许工作压力 | 1 bar |
| 称重范围 | 2000 g |
| 称量分辨率 | 1 g |
| PH测量范围 | 0 - 14 pH |
| PH测量分析 | 0.1 pH |
| 最小转速 (可调节) | 10 rpm |
| 加热温度 | 180 °C |
| 可调的安全回路 | 47 - 225 °C |
| 可调的安全回路，偏差 | 10 - 20 ±K |
| 冷却介质温度 | 3 °C |
| 加热温度控制精确度 | 1 ±K |
| 带传感器控温精确度 | 0.2 ±K |
| 转速偏差 | 5 ±rpm |
| 转速显示 | TFT |
| 加热温度控制 | TFT |
| 外接温度传感器接口 | PT 100 |
| 搅拌桨固定 | 特殊输出轴 |
| 转矩显示 | 是 |
| 转矩测量 | 趋势 |
| 计时器 | 是 |
| 计时器显示 | TFT |
| 转速控制 | 1 RPM/步 |
| 冷却方式 | 流量 |
| 温度显示 | 是 |
| 工作温度传感器 | PT 100 |
| 安全温度传感器 | PT1000 |
| 工作温度显示 | TFT |
| 安全温度显示 | TFT |
| 外接传感器使用显示 | 是 |
| 保险断路 | 是 |
| MV1 接口 | 是 |
| pH传感器接口 | 是 |
| pH值显示 | TFT |
| 外形尺寸 | 443 x 360 x 295 mm |
| 重量 | 23 kg |
| 允许环境温度 | 5 - 40 °C |
| 允许相对湿度 | 80 % |
| DIN EN 60529 保护方式 | IP 21 |
| RS 232接口 | 是 |
| USB接口 | 是 |
| Bluetooth接口 | 是 |
| 电压 | 230 / 115 V |
| 频率 | 50/60 Hz |
| 仪器输入功率 | 1200 W |
