| ||||||||||||||||||||||||||||||||
Application: The TPAK Series coolant pump is design for the circulation and spraying of cooling lubricants, especially for machine tools. This series may use on all machine tools performing Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation. It is suitable to carry liquids such as water, coolant, light oil and other clean, non aggressive matters. |
Pump Construction:
The pump is one-chamber vertical centrifugal pump, co-axial pump/motor design, impellers mounted on extended motor shaft.
Motor:
Nominal speed : 2900 / 3500 rpm
Frequency range : 50 / 60 Hz
Standard voltages : Single-phase ( TPAK 1 )
50Hz: 100-132V / 200-255V
60Hz: 100-132V / 200-255V
Three phases ( TPAK 1 ~ TPAK 8 )
50Hz: 200-255V / 380-440V
60Hz: 200-255V / 380-480V
Enclosure class : IP54
Insulation class : F.
Operation Conditions :
Max. flow : 230 L/min
Max. head : 17m
Max. ambient temperature : +40°C
Max. liquid temperature range : +90°C
Max. operating pressure : 10 kg/cm²
| Model | PH | Cycle | Input Power (W) | Volts (V) | Full load current (A) |
|---|---|---|---|---|---|
| TPAK 1 | 1 | 50 | 110 | 100-132 / 200-255 | 0.9-1.2 / 0.45-0.6 |
| 60 | 110 | 100-132 / 200-255 | 0.9 / 0.45 | ||
| 3 | 50 | 120 | 200-255 / 380-440 | 0.40-0.56 / 0.27-0.32 | |
| 60 | 120 | 200-255 / 380-480 | 0.5 / 0.3 | ||
| TPAK 2 | 3 | 50 | 270 | 200-255 / 380-440 | 1.0-1.3 / 0.6-0.8 |
| 60 | 350 | 200-255 / 380-480 | 1.2 / 0.7 | ||
| TPAK 4 | 3 | 50 | 440 | 200-255 / 380-440 | 1.5-1.9 / 0.9-1.2 |
| 60 | 620 | 200-255 / 380-480 | 2.0 / 1.1 | ||
| TPAK 8 | 3 | 50 | 930 | 200-255 / 380-440 | 3.1-4.4 / 1.9-2.6 |
| 60 | 1320 | 200-255 / 380-480 | 4.0 / 2.4 |
