| 品牌 | burkert/德国宝德 |
|---|
德国BURKERT电磁控制阀,宝德电磁控制阀样本
安装方位可根据需要安装，将执行机构朝上
阀内件超酰胺
密封材质NBR
介质压缩空气、中性气体
介质温度-10 to + 50 °C
环境温度-10 to + 55 °C
With PWM control the effective coil current with constant voltage supply is set via the duty cycle of
the rectangular signal. The PWM frequency is harmonized here on the one hａnd with its resonance
frequency and the damping of the spring-plunger-system, and on the other hａnd with the magnetic
德国BURKERT电磁控制阀,宝德电磁控制阀样本
circuit’s inductance. If the duty cycle t1/T (t1: power-on time, T: cycle duration, f=1/T: frequency) increases,
the effective coil current “I” also increases, because the rectangular signal has also increased.
If, however, the duty cycle falls, the effective coil current also falls.
Generally speaking: Small coils (e. g., type 2871) with low magnetic force react sensitively to higher
frequencies. With low frequencies these generate high motion amplitudes and an unnecessarily
high noise level. Big coils with a high magnetic force (e. g., type 2875), however, only result in dither
movements, and therefore sliding friction with low frequencies.
连接口
内孔DN 4.0 mm
阀体材质聚酰胺 (PA)
Ø 6 mm 插管连接
可按需提供 NPT 1/8
电压允差±10%
负载周期99% 连续工作
