酚醛树脂反应釜产品详细信息:
1、酚醛聚酯反应釜结构设计技术*，夹套形式分为夹套型和外半管型，通过优化设计，使反应釜加热和降温速度更快捷，加热均匀、高效，能耗少，安全性能高；
2、反应釜轴的密封采用特殊卫生级机械密封设计，也可采用填料密封和磁力密封，密封程度高.
3、酚醛聚酯反应釜能够承受120℃左右高温灭菌消毒，工作温度可达200℃，采用聚氨酯和岩棉作为保温材料；并配备卫生级压力表；
4、反应釜可采用蒸汽加热、电加热、导热油等加热方式，以满足耐酸、耐碱、耐高温、耐磨蚀、抗腐蚀等不同工作环境的工艺需求。
5、该反应釜可实现蒸汽的循环使用，降低能量损失，提升利用率，保护环境。
Phenolic Resin Reactor Product Details:
1. The structure design of phenolic polyester reactor is advanced. The jacket type is divided into jacket type and outer half tube type. Through optimization design, the heating and cooling speed of the reactor is faster, uniform heating, high efficiency, low energy consumption and safety. High performance;
2. The seal of the reactor shaft adopts special sanitary grade mechanical seal design, and can also be filled with packing and magnetic seal, and the degree of sealing is high.
3, phenolic polyester reactor can withstａnd high temperature sterilization at about 120 °C, working temperature up to 200 ° C, using polyurethane and rock wool as insulation materials; and equipped with a sanitary pressure gauge;
4. The reaction kettle can be heated by steam heating, electric heating or heat-conducting oil to meet the process requirements of different working environments such as acid resistance, alkali resistance, high temperature resistance, abrasion resistance and corrosion resistance.
5. The reactor can realize the recycling of steam, reduce energy loss, improve utilization rate and protect the environment.
