Model: MPS51
Capacity: 0~20MPa
Features:
● small volume, light weight
● suitable for threaded installation in small space
● static or dynamic pressure measurement with a short response time
Specifications:
Measurement range | 0～1KPa～5MPa （measurement medium is a dry and non-corrosive gas） 0～500KPa～20MPa（measurement medium is a non-corrosive and non-conducting liquid） |
Pressure type | Absolute pressure, manometer pressure and sealed manometer pressure(balance pressure catheter at the outlet line of manometer pressure sensor) |
Pressure overload | Double rated pressure |
Full range output | ≥40mV |
Natural frequency | ≥10KHz |
Input resistance | ≥10KΩ |
Output resistance | ≥6KΩ |
Zero voltage | ＜±2%F.S |
Non-linearity | ＜±0.5%F.S |
Repeatability and hysteresis | ＜±0.3%F.S |
Operating temperature range | -55℃～120℃ |
Compensated temperature range | -20℃～25℃ or 20℃～80℃ |
Zero temperature drift | ＜±2%F.S/55℃ |
Order guide:
Model | Capacity (KPa） | Outptu signal | Screw thread | Length | Cable length(m) | other |
MPS51 | ||||||
Order example：MPS51―100Kpa manometer pressure－0~5V―M5―30mm―0.5 | ||||||
Dimensions:
Remarks:
1）The cable is a 4-core shield wire with a diameter of 1.7mm
2）Dimensions can be customized according to customer’s request
首先大家需看出厂设置，不校正，承受力看一下称重传感器的显示屏值有没有转变。随后再校正，看一下称重传感器的显示屏承受力后，力值有没有转变。
大家再把传感器拆装下来，用万用表量一下电阻是不是正常的，正常是电阻输出线（绿白输出线一组，红黑输出线一组）是350Ω±10或是是710Ω±10，这个是传感器满载状况下电阻的输出。每一个传感器的输出不一样，称重传感器的合格证书或是称重传感器的银白色标识，正常的全是标有的，假如确定不清楚多少钱话，只有找问生产厂家了。
可以依据微型称重传感器价格的表面分辨，s形液压式称重传感器的线有没有损伤，划伤，毁坏。称重传感器有没有超负荷，称重传感器假如超负荷过多得话，传感器的外观设计会出现一点转变，例如传感器变弯，高低不平这些状况。假如称重传感器路线损伤了，大家可以用电铬铁剪掉坏的哪段，颜色对颜色再次接好。
