产品简介：Ozonator product introduction
臭氧发生室臭氧发生单元选用316L材质，整体材质不低于304不锈钢，密封及绝缘部分采用聚四氟乙烯及氟橡胶材质。发生室立式结构，单支放电体垂直放置，臭氧发生室、电源柜、冷却装置集成在同一个底座上，撬装设计，结构紧凑，安装调试方便，变频电源风冷设计，安全可靠。可配置包含西门子PLC、温度、压力、流量、浓度检测、控制阀门在内的各种自控仪表阀门。
Ozone generating unit in ozone chamber is made of 316L material, the whole material is not less than 304 stainless steel, and the sealing and insulation parts are made of PTFE and fluorine rubber.Vertical structure of generator chamber, vertical placement of single discharge body, integration of ozone generator, power cabinet and cooling device on the same base, compact structure, convenient installation and debugging, air cooling design of frequency conversion power supply, safe and reliable.Can be configured with Siemens PLC, temperature, pressure, flow, concentration detection, control valve, including a variety of automatic control instrument valves.
1）功耗基于不同的冷却水温度及浓度要求，不包括压缩机、水泵等设备。
2）氧气源浓度超过12wt%接受定做，Z高浓度18wt%（273.6mg/L），空气源臭氧浓度超过3wt%接受定做，Z高浓度4wt%（52.6mg/L）
3）设备外形及安装尺寸请联系我公司索取详细规格书。
1) Power consumption is based on different cooling water temperature and concentration requirements, not including compressors, pumps and other equipment.
2) The concentration of oxygen source exceeds 12wt%, and the highest concentration is 18wt% (273.6mg/L). The ozone concentration of air source exceeds 3wt%, and the highest concentration is 4wt% (52.6mg/L).
3) Equipment shape and installation size please contact our company for detailed specifications.
