10-300T/D吨榨油生产线设备
适用范围：大豆，菜籽，棉籽，葵花籽，茶籽、亚麻籽，蓖麻籽，棕榈仁，核桃、元宝枫籽等。
Scope of application: soybean, rapeseed, cottonseed, sunflower seed, tea seed, flax seed, castor seed, palm kernel, walnut, ingot maple seed, etc.
设备配置及功能：筛选机、去石机、轧胚机、蒸炒锅、榨油机、滤油机、加热系统和控制系统等。
Equipment configuration and function: screening machine, stone removing machine, rolling machine, steaming and frying pan, oil press, oil filter, heating system and control system, etc.
产品介绍:
此工艺采用大型螺旋榨油机制油，螺旋榨油机是目前应用较多的一种压榨制油设备，它具有，连续化处理量大、动态压榨时间短、出油率高、劳动强度低等优点.
采用压榨（热榨、冷榨）工艺、压榨-浸出工艺、预榨-浸出工艺、直接浸出工艺。与油料品种、取油工艺、产品质量标准、油料综合利用、投资规模等多种因素相关，因此有多种方案可供选择。
油料的预处理是油脂制取过程的起点，包括仓储、仓储、干燥、清理、破碎、剥壳或去皮、调质、轧坯、蒸炒及膨化等，每一项都影响到出油率、成品油的质量及油饼的质量。根据油料品种、加工目的和含油量不同，预处理工序也相应不同。我公司掌握了各种油料的预处理方法，尤其是烘干、大豆脱皮、花生脱红衣、软化、压榨、膨化等技术成熟。
预处理的目的：取得结构、出油率的料坯；得到佳的产品油脂和饼粕；提高设备处理能力、降低能耗以及提高经济技术指标。
注意事项：
1、 采用灵活的工序组合，同一工艺可以加工多种油料。
2、 副产品的综合利用。
3、 采用脱皮和低温处理新技术，能保证蛋白含量高而且变性最少。
4、 对浸出困难、粉末大或要求提高产量的原料采用膨化处理，降低残油和溶耗，产量提高50-80%。
5、 影响出油率的因素分两类，油料：包括含油率、含杂量、物料大小、水分、温度及油料细胞的破坏程度。机械：机械压力、压榨机械、压榨温度、料层厚度及排油阻力。
为满足广大用户的需求，使用户利润。我公司以工艺合理设备成本低为基础，针对大综油料设计和制作不同的工艺及设备。提供一种油料多种工艺，一个工艺处理多种油料，一个工艺多种设备，成度的满足用户需求。
product description:
This process uses a large spiral oil extraction mechanism oil screw press is used more often in a press oil equipment, it has continuously processing a large amount of dynamic short press time, high oil, low labor intensity advantage.
Using the press (hot pressing, cold pressing) process, crushing - leaching technology, pre-press - leaching process, direct leaching process. And varieties of oil, a variety of factors to take oil technology, product quality standards, fuel utilization, investment and other related, therefore a variety of programs to choose from.
Pretreatment of oil is the starting point for oil preparation process, including warehousing, storage, drying, cleaning, crushing, peel or peeled, conditioning, billets, steamed and fried puffed like, each of which affects the oil yield , quality of the oil quality and oil cake. According to oil varieties, processing and oil content of different purposes, different pretreatment process accordingly. I mastered all kinds of oil pretreatment methods, especially drying, peeling soybeans, peanuts off the red, soften, pressing, extrusion and other advanced technology is mature.
Pretreatment purpose: to obtain the best structure, the highest oil yield blanks; to get the best quality products and oil meal; improve equipment processing capacity, reduce energy consumption and improve the economic and technical indicators.
Precautions:
1, a flexible combination of process, the same process can be processed more oil.
2, by-product utilization.
3, the use of low-temperature processing and peeling of new technologies to ensure a high protein content and the least variability.
4, leaching difficulties, powder or require a large increase production of raw materials using expanding treatment, and reduce the residual solvent loss, production increased by 50-80%.
5, the factors affecting the rate of two types of oil, oil: Including oil content, trash content, material size, moisture, temperature and oil damage cells. Mechanical: mechanical stress, mechanical pressing, pressing temperature, material thickness and drain resistance.
To meet the needs of users, allowing users to maximize profits. My company to lower process equipment reasonable cost basis for large mechanized fuel design and production of different processes and equipment. Oil provides a variety of techniques, a variety of treatment process oil, a variety of process equipment, to the maximum degree meet customer needs.
