组合式石油产品倾点测定器 (JSR0806)

JSR0806组合式石油倾点测定器

一、符合GB/T3535标准     

二、技术指标

冷孔尺寸：Φ45×120 mm   8孔

温度范围：0~-51℃ （分四段）

制冷方式：压缩机制冷

测温方式：数显温控仪测控

工作电源：～220V±10％　　50HZ　

消耗功率：750w

三、性能及特点：

1、采用压缩机复叠式制冷方式，温度可达-51℃（室温20℃时）；       

2、仪器可在40℃以下的各种环境中工作，适应性强，噪音低；

3、仪器采用数字温控仪控测温，温度传感器反应快，分辨率高，控温精度好；

4、冷室与控制部分通过铜管软性连接，冷室部分无振感；

5、仪器分4槽，8孔，可以分别控温。

JSR0806 combined oil pour point tester

I. It conforms to GB/T3535 standard

Ii. Technical indicators

Cold hole size: 8 hole Φ 45 * 120 mm

Temperature range: 0~-51℃ (divided into four sections)

Refrigeration mode: compressor refrigeration

Temperature measurement: digital display temperature controller

Power supply: ~ 220V± 10% 50HZ

Power consumed: 750W

Iii. Performance and Characteristics:

1. The compressor is used for multiple refrigeration, with the temperature up to -51℃ (at room temperature of 20℃);

2. The instrument can work in various environments below 40℃, with strong adaptability and low noise;

3. The instrument adopts digital temperature controller to control and measure temperature. The temperature sensor has fast response, high resolution and good temperature control accuracy.

4. The cold chamber and the control part are soft connected by copper pipe, and the cold chamber part has no vibration sensation;

5. The instrument has 4 slots and 8 holes for temperature control.