行业产品

  • 行业产品

上海朕锌电气设备公司


当前位置:上海朕锌电气设备公司>>>>6ES7 416-2XN05-0AB0

6ES7 416-2XN05-0AB0

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号6ES7 416-2XN05-0AB0

品       牌

厂商性质经销商

所  在  地上海市

更新时间:2018-06-05 01:09:40浏览次数:124次

联系我时,请告知来自 环保在线

经营模式:经销商

商铺产品:955条

所在地区:上海上海市

联系人:田敏 (销售工程师)

产品简介

6ES7 416-2XN05-0AB0
CPU
16ES7211-0AA23-0XB0CPU221 DC/DC/DC,6输入/4输出
26ES7211-0BA23-0XB0CPU221 继电器输出,6输入/4输出

详细介绍

6ES7 416-2XN05-0AB0西门子PLC   6ES7 416-2XN05-0AB0西门子代理  

西门子销售

    田敏(销售工程师)         主营产品(西门子)SIEMENS
手机             可编程控制器(PLC)    人机界面(HMI)
             数控伺服    工业以太网
传真             数控系统    电线电缆
商务    2304334979         变频器    伺服驱动
地址    上海市金山区枫兰路128号    以上产品*,质量保证!

Area of application

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

锚点

Design

Both CPUs are equipped with the following:

  • Powerful processor:
    The CPUs achieve instruction execution times as low as 0.03 μs per binary instruction.
  • CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);
    CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);
    CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);
    fast RAM for parts of the user program relevant to execution.
  • Flexible expansion:
    Up to 262144 digital and 16384 analog inputs/outputs.
  • Multi-point interface MPI:
    With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
  • Mode selector switch:
    Designed as toggle switch.
  • Diagnostics buffer:
    The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
  • Real-time clock:
    The date and time are appended to diagnostic messages of the CPU.
  • Memory card:
    For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
  • Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
    The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
    Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

  • A module slot:
    An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

  • PROFINET interface with 2 ports (switch):
    • PROFINET I/O, 256 IO devices connectable
    • PROFINET CBA

锚点

Functions

  • Block protection:
    A password concept protects the user program from unauthorized access.
  • Integral HMI services:
    The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
  • Integrated communications functions:
    • PG/OP communication
    • Shared data communication
    • S7 standard communication
    • S7 communication
  • Firmware update using network

CPU 416-3 PN/DP additional:

  • Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
  • Distributed inligence in Component Based Automation (CBA) on PROFINET
  • Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

  • Multi-point interface MPI:
    • Definition of station addresses.
    • Startup/cycle behavior
    • Stipulation of the maximum cycle time and communications load
  • Address assignment:
    Addressing of I/O modules.
  • Retentive ranges:
    Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
  • Size of the process image, local data.
  • Length of the diagnostics buffer
  • Protection level:
    Definition of access authorization for program and data
  • System diagnostics:
    Definition of the handling and scope of diagnostic messages
  • Timed interrupts:
    Setting of periodicity

CPU 416-3 PN/DP additional:

  • PROFINET interface
  • Parameterization of time synchronization using NTP procedure

Indication and information functions

  • Status and error indicators:
    LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
  • Test functions:
    The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
  • Information functions:
    The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

锚点

Technical Specifications

Order number

6ES7416-2XN05-0AB0

6ES7416-3XR05-0AB0

6ES7416-3ES06-0AB0


CPU 416-2, MPI, PROFIBUS, 5.6 MB

CPU 416-3, 11.2 MB, 3 INTERFACES

CPU416-3 PN/DP, 16 MB, 3 INTERFACES

Product type designation




General information




Engineering with




  • ● Programming package

STEP7 V 5.3 SP2 or higher with HW update

STEP7 V 5.3 SP2 or higher with HW update

STEP7 V5.5 or higher/iMap V3.0 + iMap STEP7 Add-on V3.0 SP5 or higher

Supply voltage




Rated value (DC)




  • ● 24 V DC


No; Power supply via system power supply

No; Power supply via system power supply

Power losses




Power loss, typ.

4 W

5.5 W

6.5 W

Memory




Work memory




  • ● Integrated

5.6 Mbyte

11.2 Mbyte

16 Mbyte

  • ● integrated (for program)

2.8 Mbyte

5.6 Mbyte

8 Mbyte

  • ● integrated (for data)

2.8 Mbyte

5.6 Mbyte

8 Mbyte

Load memory




  • ● expandable FEPROM, max.

64 Mbyte

64 Mbyte

64 Mbyte

  • ● integrated RAM, max.

1 Mbyte

1 Mbyte

1 Mbyte

  • ● expandable RAM, max.

64 Mbyte

64 Mbyte

64 Mbyte

CPU processing times




for bit operations, typ.

30 ns

30 ns

30 ns

for word operations, typ.

30 ns

30 ns

30 ns

for fixed point arithmetic, typ.

30 ns

30 ns

30 ns

for floating point arithmetic, typ.

90 ns

90 ns

90 ns

IEC counter




  • ● present

Yes

Yes

Yes

IEC timer




  • ● present

Yes

Yes

Yes

Data areas and their retentivity




Flag




  • ● Number, max.

16 kbyte

16 kbyte; Size of bit memory address area

16 kbyte; Size of bit memory address area

Address area




I/O address area




  • ● Inputs

16 kbyte

16 kbyte

16 kbyte

  • ● Outputs

16 kbyte

16 kbyte

16 kbyte

Process image




  • ● Inputs, adjustable

16 kbyte

16 kbyte

16 kbyte

  • ● Outputs, adjustable

16 kbyte

16 kbyte

16 kbyte

Hardware configuration




Slots




  • ● Required slots

1

2

2

Time of day




Clock




  • ● Hardware clock (real-time clock)

Yes

Yes

Yes

Operating hours counter




  • ● Number

8

16

16

Interfaces




Interface/bus type


1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)

1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)

Number of RS 485 interfaces

2

2

1

Number of other interfaces

0

0

0

1st interface




Interface type

Integrated

Integrated

Integrated

Physics

RS 485 / PROFIBUS

RS 485 / PROFIBUS + MPI

RS 485 / PROFIBUS + MPI

Functionality




  • ● MPI

Yes

Yes

Yes

  • ● DP master

Yes

Yes

Yes

  • ● DP slave

Yes

Yes

Yes

DP master




  • ● Number of DP slaves, max.

32

32

32

2nd interface




Interface type

Integrated

Integrated

PROFINET

Physics

RS 485 / PROFIBUS

RS 485 / PROFIBUS

Ethernet RJ45

Number of ports



2

Functionality




  • ● DP master

Yes

Yes

No

  • ● DP slave

Yes

Yes

No

  • ● PROFINET IO Controller



Yes

  • ● PROFINET IO Device



Yes

  • ● PROFINET CBA



Yes

DP master




  • ● Number of DP slaves, max.

125

125


PROFINET IO Controller




  • ● Max. number of connectable IO devices for RT



256

  • ● Number of IO devices with IRT and the option "high flexibility"



256

  • ● Number of IO Devices with IRT and the option "high performance", max.



64

3rd interface




Interface type


Pluggable interface module (IF), technical data as for 2nd interface

Pluggable interface module (IF)

Plug-in interface modules


IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)

IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)

Physics


RS 485 / PROFIBUS

RS 485 / PROFIBUS

Functionality




  • ● MPI


No

No

  • ● DP master


Yes

Yes

  • ● DP slave


Yes

Yes

DP master




  • ● Number of DP slaves, max.


125

125

Isochronous mode




Isochronous operation (application synchronized up to terminal)

Yes

Yes; For PROFIBUS only

Yes; Via PROFIBUS DP or PROFINET interface

Communication functions




PG/OP communication

Yes

Yes

Yes

Data record routing


Yes

Yes

Global data communication




  • ● supported

Yes

Yes

Yes

S7 basic communication




  • ● supported

Yes

Yes

Yes

S7 communication




  • ● supported

Yes

Yes

Yes

S5-compatible communication




  • ● supported

Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)

Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5

Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5

Standard communication (FMS)




  • ● supported

Yes; Via CP and loadable FB

Yes; Via CP and loadable FB

Yes; Via CP and loadable FB

Open IE communication




  • ● TCP/IP



Yes; via integrated PROFINET interface and loadable FBs

  • — Number of connections, max.



94

  • ● ISO-on-TCP (RFC1006)

Via CP 443-1 Adv. and loadable FB

Via CP 443-1 and loadable FB

Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs

  • — Number of connections, max.



94

  • ● UDP



Yes; via integrated PROFINET interface and loadable FBs

  • — Number of connections, max.



94

Web server




  • ● supported

No; Via CP

No

Yes

Number of connections




  • ● overall

64

64

96

Configuration




programming




Programming language




  • — LAD

Yes

Yes

Yes

  • — FBD

Yes

Yes

Yes

  • — STL

Yes

Yes

Yes

  • — SCL

Yes

Yes

Yes

  • — CFC

Yes

Yes

Yes

  • — GRAPH

Yes

Yes

Yes

  • — HiGraph?

Yes

Yes

Yes

Know-how protection




  • ● User program protection/password protection

Yes

Yes

Yes

  • ● Block encryption



Yes; With S7 block Privacy

Dimensions




Width

25 mm

50 mm

50 mm

Height

290 mm

290 mm

290 mm

Depth

219 mm

219 mm

219 mm

Weights




Weight, approx.

720 g

0.9 kg

900 g


感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

环保在线 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.hbzhan.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,环保在线对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~