污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料
广州乘方自动化设备有限公司销售部
顺序控制CPU模块:F3SP21-0N,F3SP22-0S,F3SP25-2N,F3SP35-5N,F3SP28-3N,F3SP28-3S,F3SP38-6N,F3SP38-6S,F3SP53-4H,F3SP53-4S,F3SP58-6H,F3SP58-6S,F3SP59-7S,F3SP66-4S,F3SP67-6S,F3SP71-4N,
CPU模块
顺序控制CPU模块:F3SP21-0N,F3SP22-0S,F3SP25-2N,F3SP35-5N,F3SP28-3N,F3SP28-3S,F3SP38-6N,F3SP38-6S,F3SP53-4H,F3SP53-4S,F3SP58-6H,F3SP58-6S,F3SP59-7S,F3SP66-4S,F3SP67-6S,F3SP71-4N,F3SP71-4S,F3SP76-7N,F3SP76-7S,F3FP36-3N
基本CPU模块:F3BP20-0N,F3BP30-0N
CPU | 顺序型CPU模块 | F3SP28-3S | 梯形图30K步、基本指令≥0.045μs、带内存 |
F3SP38-6S | 梯形图120K步、基本指令≥0.045μs、带内存 | ||
F3SP53-4S | 梯形图56K步、基本指令≥0.0175μs、带内存 | ||
F3SP58-6S | 梯形图120K步、基本指令≥0.0175μs、带内存 | ||
F3SP59-7S | 梯形图256K步、基本指令≥0.0175μs、带内存 | ||
F3SP66-4S | 梯形图56K步、基本指令≥0.0175μs、带网络功能 | ||
F3SP67-6S | 梯形图120K步、基本指令≥0.0175μs、带网络功能 | ||
BASIC型CPU模块 | F3BP20-0N | BASIC语言、120K字节 | |
F3BP30-0N | BASIC语言、510K字节 |
高速执行指令,可轻松处理高速的处理和响应。 (扫描时间为1 ms为20K步程序使用F3SP53/58/59/66/67时)。
传感器控制功能,可以快速扫描(输入??程序执行??输出)除了正常扫描。这允许稳定的输入/输出响应为400微秒(200微秒的2倍)(F3SP28/38/53/58/59/66/67)。
指数修改F3SP08和对象梯形图编程,方便程序开发和修改(F3SP28/38/53/58/59/66/67)。
调整功能,如强制置位/复位,不会影响程序计算的结果,以及扫描操作,方便程序调试和修改。
编程器端口(连接端口,用于编程工具)支持一台个人电脑的,使联动上一级计算机和显示单元,用于个人计算机的连接模块,而不需要(在115K bps的波特率F3SP28/38/53/58/59)。
使用结构有利于数据重用(F3SP28/38/53/58/59/66/67)。
电路意见,电路subcomments,标记名称的定义(包括I / O注释)可以存储在CPU的程序区进行更有效的维护(F3SP28/38/53/58/59/66/67)。
间接规范和输入宏指令简化程序代码共享和程序componetization(F3SP28/38/53/58/59/66/67)的。
部分可以下载使用更高效的调试(F3SP28/38/53/58/59/66/67)。
High-speed execution of instructions easily handles high-speed processing and response. (Scan time of 1 ms for a 20K step program when using an F3SP53/58/59/66/67).
Sensor control function enables quick scan (input ?? program execution ?? output) besides normal scan . This allows stable input/output response of 400 μs (200 μs x2) (for F3SP28/38/53/58/59/66/67).
Index modification for F3SP08 and the object ladder programming facilitates program development and modification (for F3SP28/38/53/58/59/66/67).
Enriched functions, such as forced set/reset that are not affected by the results of program computations as well as a scan operation, facilitate program debugging and modification.
The PROGRAMMER port (connection port for programming tool) supports a personal computer link, allowing linkage to upper-level computers and display units without need for a personal computer link module (at baud rate of 115K bps for F3SP28/38/53/58/59).
The use of structure facilitates data reuse (for F3SP28/38/53/58/59/66/67).
Circuit comments, circuit subcomments, tag name definitions (including I/O comments) can be stored in the program area of the CPU for more efficient maintenance (for F3SP28/38/53/58/59/66/67).
Indirect specification and input macro instructions simplify program code sharing and program componetization (for F3SP28/38/53/58/59/66/67).
Partial download can be used for more efficient debugging (for F3SP28/38/53/58/59/66/67).
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份