GD610 Technical Specifications 技术规格 |
PCB Parameters PCB 参数 |
Maximum PCB Size zui大板尺寸 (X x Y) | 610mm x 610mm |
Minimum PCB Size zui小板尺寸 (Y x X) | 80mm x 80mm |
PCB Thickness PCB厚度 | 0.4mm~14mm |
PCB Warpage 翘曲量 | Max. PCB Diagonal 1% Max. PCB对角线 1% |
Maximum PCB Weight zui大板重量 | 6.0Kg |
Plate Edge Clearance 板边缘间隙 | Up to 1.5mm 构形至 1.5 mm |
Maximum Bottom Clearance zui大底部间隙 | 25mm |
Speed of Transmission 传送速度 | 1500mm/秒Second(Max) |
Apart from the Ground Transmission Height 距地面的传送高度 | 900±40mm |
Transfer Orbit Direction 传送轨道方向 | Left-Right, Right-Left, Left-Left, Right-Right 左 – 右、右 – 左、左 – 左、右 – 右 |
Transmission Mode 传输方式 | One Stage (Option: Three Stages)一段式运输导轨(选项:三段式轨道) |
Clamping Direction of PCB夹持方法 | Flatten the top automatic tablet, software adjustable pressure elastic side edges lock bottom suction vacuum chamber 顶部自动压片压平,软件可调压力的弹性侧面边缘锁定,底部吸腔式真空 |
Board Support Method 板支撑方法 | Magnetic Pin/Contour Blocks/Special Workpiece Fixture 磁性顶针,等高块,的工件夹具 |
Printing Parameters 印刷参数 |
Print Head 印刷头 | Two independent motorised printheads Gas-electric driving head(Option) Closed-loop print head(Option) 两个独立直联的马达驱动,气电联动的驱动头(选项),闭环印刷头(选项) |
Form Work Frame Size 模板框架尺寸 | 550mm x 650mm~800 mm x 864 mm (864为机器前后方向长度) |
Maximum Printing Area zui大印刷区域 (X x Y) | 610mm x 610mm |
Squeegee Type 刮刀类型 | Steel/Rubber Squeegee Blade(Angle:45/55/60 or according to actual effect to set the angle) 钢刮刀(角度45°/55°/60°按印刷工艺匹配选择)[胶刮刀/选项] |
Length of Squeegee 刮刀长度 | 220mm~650mm |
Height of Squeegee 刮刀高度 | 65±1mm |
Thickness of Squeegee 刮刀片厚度 | 0.25mm Diamond-like carbon涂层 |
Printing Mode 印刷模式 | Single or Double Squeegee Printing 单或双刮刀印刷 |
Stripping Length 脱模长度 | 0.02 mm - 12 mm |
Printing Speed印刷速度 | 6 mm/sec - 200 mm/sec |
Printing Pressure印刷压力 | 0.5kg - 10Kg |
Printing Stroke 印刷行程 | ±320 mm(from central从中心) |
Image Parameters 影像参数 |
Imaging Horizon 影像视域 (FOV) | 10.24mm x 6.4mm |
Adjustment Range 平台调整范围 | X,Y:±10.0mm,θ:±2.0°. |
Benchmark Type 基准点类型 | Standard Shapes (Refer to SMEMA SPEC) PAD and Opening 标准形状基准点 (见SMEMA 标准),焊盘 /开孔 |
Camera System 摄像机系统 | Single camera ,up/down single imaging visual system, geometric matching orientation 单独照相机 , 向上 / 向下单独成像视觉系统,几何匹配定位 |
Performance Parameters 性能参数 |
Calibration Repeat Precision 影像校准重复精度 | ±12.5micron/微米 (±0.0005") @6 σ,Cp≥2.0 |
Printing Repeat Precision 印刷重复精度 | ±25 micron/微米 (±0.001") @6 σ,Cp ≥ 2.0 |
Cycle Time 循环时间 | ≤7.5sec |
Changeover Time 换线时间 | ≤5mins |
Equipment 设备 |
Power Requirement 功率要求 | AC220V±10%,50/60HZ,15A |
Compressed Air Requirement 压缩空气要求 | 4~6Kg/cm2, 10.0 Diameter of Tube直径管 |
Operating System 操作系统 | Windows XP |
Outline Dimension 外观尺寸 | 1220mm (W)x 1660mm (L) x 1435mm (H) |
Weight of Printer 机器重量 | 1230Kg |