一、产品名称：ZJC-50KV耐电压击穿强度试验仪【无线蓝牙】
Product Name: ZJC-50KV withstand voltage breakdown strength tester
二、主要用途及功能：
Two, the main purpose and function:
耐电压击穿强度试验仪【无线蓝牙】满足GB1408-2006绝缘材料电气强度试验方法， GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验， HG/T 3330绝缘漆漆膜击穿强度测定法，GB/T3333 电览纸工频电压击穿试验方法，GB12656电容器纸工频电压击穿试验方法 及ASTM D149 标准要求. 主要适用于固体绝缘材料如：塑料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质在工频电压或直流电压下击穿强度和耐电压时间的测试。
Meet the test method of GB1408-2006 electrical strength of insulating materials, GB/T1695-2005 vulcanized rubber voltage breakdown strength and voltage endurance test, HG/T method for the determination of the 3330 insulating paint film breakdown strength, GB/T3333 cable paper voltage breakdown testing method, GB12656 capacitor voltage breakdown testing method and ASTM D149 standard. Mainly applicable to solid insulation materials such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media in the frequency of the voltage or DC voltage breakdown strength and voltage withstand the test of time.
采用计算机控制，试验过程中可动态绘制出试验曲线，试验的曲线可以多种颜色叠加对比，局部放大，曲线上任意一段可进行区域放大分析。可对试验数据进行编辑修改，灵活适用；试验条件及测试结果等数据可自动存储；试验报告格式灵活可变，适用于不同用户的不同要求。可对一组试验中曲线数据的有效与否进行人为选定。
Using computer control, the test process can be drawn dynamically test curve, the test curve can be a variety of color superposition contrast, local amplification, arbitrary section of the curve can be analyzed in the region. The test data can be edited and modified, and the test conditions and test results can be stored automatically. The test report format is flexible and changeable, which is suitable for different requirements of different users. The validity of the curve data in a set of experiments can be selected artificially.
三、软件程序控制功能：
Three, software program control function:
1、该设备试验过程中可动态绘制出试验曲线，试验的曲线可以多种颜色叠加对比.
1, the test process of the device can be dynamically plotted the test curve, the curve can be a variety of test color superposition contrast
2、可对试验数据进行编辑修改，灵活适用；
2, the test data can be edited and modified, flexible application;
3、试验报告试验条件及测试结果等数据可自动存储；
3, test report test conditions and test results and other data can be stored automatically;
4、格式灵活可变，适用于不同用户的不同要求。
4, flexible and variable format, suitable for different requirements of different users.
5、可对一组试验中曲线数据的有效与否进行人为选定。
5, can be a group of test data in the curve of the effectiveness of artificial selection.
6、试验结果数据可导入EXECL。
6, the test results can be imported into EXECL.
7、软件设备人员管理功能，在试验人员可设置自己的试验项目和试验参数，设置自己的试验内容后别人无法进入等功能。
7, software equipment personnel management function, in the test personnel can set up their own test items and test parameters, set their own test content after others can not enter the function.
四、安全说明：
Four, safety instructions:
试验在试验箱中进行，试验箱门打开时电源加不到高压变压器输入端，即高压侧无电压。50KV测试设备高压电极距离试验箱壁的zui近距离大于370mm，50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm，试验时即使人接触箱壁也不会有危险。
The test is carried out in the test box, the power supply can not be added to the input end of the high voltage transformer when the test box door is opened. 50KV test equipment of high voltage electrode distance test box wall distance is greater than 370mm, 50KV test equipment of high voltage electrode distance test box wall distance is greater than 250mm, even when the test contact wall of the box will not be in danger.
设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
Equipment to install a separate protective ground wire. The protective earth wire is mainly used to reduce the electromagnetic interference caused by the breakdown of the sample. Can also avoid the control computer out of control.
该试验设备的电路设有多项保护措施，主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。
The circuit of the test equipment is provided with a plurality of protective measures, such as over-current protection, voltage loss protection, leakage protection, short circuit protection, DC test discharge alarm, etc..
直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注：因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成伤害)。
DC discharge test alarm function: in the equipment finished DC test, when open the door will automatically alarm test device, discharge device used on the device after discharge until the alarm will automatically be cancelled. (Note: because the DC test not put electricity danger to personal safety, can not be directly taken to remind users electrode. Discharge so as to avoid injury).
试验放电装置，随主机为一体化，改进了以往单独配备一根放电杆的功能。
The utility model is characterized in that the test discharge device is integrated with the host machine, and the function of a single electric pole is improved.
六级高压安全断电控制：①总电源开关②高压断电开关（钥匙开关）③调压器复位开关④试验箱门安全开关⑤高压变压器输入侧限流空开⑥漏电保护开关
Six stage high pressure safety power-off control: power switch, high voltage disconnecting switch (key switch) the regulator reset switch the test box door safety switch, high voltage transformer input side of the open limit flow leakage protection switch
五、主要技术要求：
Five, the main technical requirements:
输入电压： AC 220 V
Input voltage: AC 220 V
输出电压： AC 50KV DC 50 kV
Output voltage: AC 50KV DC 50 kV
电器容量： 5 KVA
Electrical capacity: 5 KVA
高压分级： 5kV； 10kV； 20kV； 50kV
High pressure classification: 5kV; 10kV; 20kV; 50kV
击穿电压： 50kV
Breakdown voltage: 50kV
击穿电压升压速率共分七级（可选定）：
Breakdown voltage boost rate is divided into seven stages (optional):
A、0.1 kV/s
A, 0.1 kV/s
B、0.2 kV/s
B, 0.2 kV/s
C、0.3 kV/s
C, 0.3 kV/s
D、0.5 kV/s
D, 0.5 kV/s
E、1.0 kV/s
E, 1 kV/s
F、2.0 kV/s
F, 2 kV/s
G、3.0 kV/s
G, 3 kV/s
试验方法：直流试验 交流试验
Test method: DC test AC test
升压方式：1、匀速升压 2、阶梯升压 3、耐压试验 (可选)
Boost mode: 1, uniform pressure boost of 2, step up pressure of 3, pressure test (optional)
过电流保护装置：试样击穿时在0.1S内切断电源.
Over current protection device: the power supply is cut off when the sample is broken in 0.1S
漏电电流选择：1—30 mA.
Leakage current selection: 1 - 30 mA.
调压器可均匀连续的调节电压.
The regulator can regulate the voltage continuously and uniformly
六：注意事项：
Six: note:
本仪器为高压试验设备，使用时必须注意以下几点
This instrument is a high voltage test equipment, the use must pay attention to the following points
1、仪器安装时应具有独立的接地线。
1, the instrument installation should have independent grounding wire.
2、在开机前，操作者要首先熟悉操作方法。
2, before the boot, the operator should be familiar with the operation method.
3、仪器不能在有强烈腐蚀性气体及有颗粒杂质的气体环境中使用。
3, the instrument can not have a strong corrosive gas and particulate impurities in the gas environment.
4、试 验 环 境 温 度 15度到25度之间，相对湿度60％到70％之间
4, the test environment temperature between 15 degrees to 25 degrees, relative humidity between 60% to 70%
5、试样击穿瞬间有火花产生并伴有声响，属正常现象。
5, the sample breakdown instant spark and accompanied by sound, is a normal phenomenon.
6、每次更换试样或接触高压电极时必须用高压放电对高压电极进行放电，放电时间5秒以上。
6, each time the replacement of the sample or contact with the high-voltage electrode must be used to discharge the high-voltage electrode discharge, discharge time of 5 seconds or more.
7、每次进行试验前，必须检查仪器接地。
7, before each test, the instrument must be grounded.
七、主要配置：
Seven, the main configuration:
配件    数量    备注
Number of accessories
主机    一台
Host one
试验装置    一套
Test set
控制系统    一套
A set of control system
数据采集系统    一套
A set of data acquisition system
试验用电极    一套    薄膜电极：￠25mm两个 ￠75mm一个
A set of test electrode for thin film electrode of 25mm: two of 75mm a
试验油箱    一套
Test tank set
放电系统    一支
A discharge system
试验用软件    一套
A set of test software
品牌计算机    一套
Brand computer set
打印机一台    一台
One printer
使用说明书    一份
Instruction manual