南京镇江常州无锡苏州包装印刷废气处理方法专业从事环保设备技术研究,设计制造企业,主要产品有uv光氧化设备,酸碱废气处理塔,有机废气处理设备,工业废气净化,污水治理的环保企业

广泛用于石油、化工、橡胶、涂装、印刷等行业车间里挥发出的有害有机废气净化处理中，苯类，醇类，醚类等有机废气均能净化。该装置系统设计完整，附属设备配套齐全，净化效率高，自动化程度高。它能有效地净化车间环境、消除污染、改善劳动操作条件，确保工人身体健康，并能解决二次污染。zui适用于低浓度（50~1000ppm）且回收经济价值不大，不宜采用吸附回收处理的有机废气，尤其对大风量的处理场合，均可获得满意的经济效益和社会效益。

二、产品优点：
1、设计原理*，用材*，性能稳定，结构简单，安全可靠，节能省力，无二次污染。设备占地面积小，重量轻。
2、采用窝蜂陶瓷状为载体的贵金属催化剂，阻力小，活性高。当有机蒸汽浓度达到2000ppm以上时，可维持自燃。
3、耗电量小，由于床层阻力小，用低压风机就可以工作，耗电少，噪音低。
4、吸附有机物废气的活性炭层，用催化燃烧后的废气进行脱附再生，吸附后的气体再送催化燃烧室进行净化，不需外部能量，运行费用低，节能*。
三、结构
催化燃烧系统含：热交换器，催化燃烧净化器（加热箱+催化反应室），缓冲箱
四、工作原理
该工艺主要采用高效催化剂，废气在催化剂作用下发生氧化反应，生成无毒无味的二氧化碳（CO2）和水（H2O）； 
其*的高效换热系统保证了余热的有效回收，当废气浓度达到一定程度时，换热系统能使有机废气加热到催化氧化反应的起始温度，无需电加热，通过自身热量平衡处理有机废气。
该装置是将浓缩的有机废气引入主要设备。有机废气经内装加热装置从活性炭层中将有机物分离后，通过催化剂的作用分解成水和二氧化碳，同时释放能量，由热交换装置置换能量，用于维护设备自燃的能源。
当催化床温度达到250～300℃时，催化燃烧床开始反应，利用废气燃烧产生的热空气循环使用，此时电加热停止，不需要外加热，单床脱附，脱附时间为2~3小时，设定时间活性炭吸附箱定时自动切换脱附，内部装填的陶瓷蜂窝体贵金属催化剂使用寿命为8000小时。整个脱附系统采用多点温度控制，保证脱附效果的稳定。

Widely used in petroleum, chemical, rubber, coating, printing and other industries volatile organic waste gas in the purification process, benzene, alcohols, ethers and other organic waste can be purified. The system design of the device is complete, the auxiliary equipment is complete, the purification efficiency is high, and the degree of automation is high. It can effectively clean the workshop environment, eliminate pollution, improve labor operating conditions, ensure the health of workers, and solve secondary pollution. The most suitable for low concentration (50 ~ 1000ppm) and the recovery of economic value is not, should not use the adsorption of organic waste gas treatment, especially for large wind volume treatment occasions, can obtain satisfactory economic and social benefits.
Second, product advantages:
1. Advanced design principle, unique materials, stable performance, simple structure, safety, reliability, energy saving, no secondary pollution. The equipment has a small footprint and light weight.
2, the use of ceramic honeycomb as a carrier of precious metal catalyst, low resistance, high activity. When the organic vapor concentration reaches 2000 ppm or more, spontaneous combustion can be maintained.
3, small power consumption, due to small bed resistance, with a low pressure fan can work, low power consumption, low noise.
4. The activated carbon layer that adsorbs organic waste gas is desorption-regenerated with the exhaust gas after catalytic combustion. The adsorbed gas is sent to the catalytic combustion chamber for purification. No external energy is required, the operation cost is low, and the energy-saving effect is significant.