污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料 其它水处理设备
津市市石油化工仪器有限公司
燃料胶质含量测定器JSR0601
产品型号:JSR0601
产品名称:燃料胶质含量测定器JSR0601
产品说明:
JSR0601燃料胶质含量测定器(喷射蒸发法)
一、符合GB/T8019、ASTM D381、ISO6246标准
二、主要技术参数:
热浴尺寸:φ52×70mm 5孔 金属浴
加热方式:铸铝电热板加热
控温方式:数显温控自动控温
加热温度范围:160~165℃
控温精度:±1℃
气体流量:5×600mL/s±90 常温常压下
工作电源:AC220V±10% 50HZ
三、性能及特点:
1、采用数显温控仪控温,温度显示直观,抗干扰性强,
测温精度高,且操作简便;
2、采用金属浴,加热速度快,温度误差小,准确可靠,维修方便;
3、气路系统中,用5支流量计分别测定每个孔的出气流量,流量准确,观察方便;
4、热浴有5孔,气流均匀,可以同时对比做样。
JSR0601 fuel gelatinometer (jet evaporation method)
I. Comply with GB/T8019, ASTM D381, ISO6246 standards
Ii. Main Technical parameters:
Hot bath size: 52×70mm 5-hole metal bath
Heating mode: cast aluminum heating plate heating
Temperature control mode: digital display temperature control automatic temperature control
Heating temperature range: 160~165℃
Temperature control accuracy: ±1℃
Gas flow rate: 5×600mL/s±90 at normal temperature and pressure
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. Adopting digital display temperature controller to control temperature, temperature display is intuitive and has strong anti-interference.
High temperature measurement accuracy, and easy to operate;
2. Adopt metal bath, heating speed is fast, temperature error is small, accurate and reliable, maintenance is convenient;
3. In the air path system, 5 flowmeters are used to measure the air flow rate of each hole, which is accurate and easy to observe.
4. The hot bath has 5 holes, and the airflow is uniform, so the samples can be compared at the same time.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份