产品型号：JSH1101
产品名称：润滑油老化特性测定器(JSH1101)
产品说明：
JSH1101润滑油老化特性测定器
一、符合SH/T0192标准
二、主要技术参数：
热浴尺寸：350×140×70mm 4孔
加热温度：常温～200℃±0.5℃
控温方式：数显温控仪测控
气体流量：250mL±4mL/mim
计时方式：电子计时
工作电源：AC220V±10％ 50HZ
功 率：1000W
三、性能特点：
1、采用电加热板对金属铝合金加热，升温快，热容量大，温度稳定，采用金属浴代替油浴，克服了油的各种弊端；
2、仪器可从常温至200℃范围内任意一点温度进行自动控制；
3、采用数显温控仪自动测温和控温，温度数字显示直观，传感反应快，分辩率高，测温准确；
4、采用电子计时器，时间数显，可在规定范围内任意设置时间，方便可靠；
5、采用时间继电器控时，当达到所设定的时间时，仪器自动报警，同时切断电源；
6、仪器有4孔，可同时插入4只氧化管，对比做样。
JSH1101 lubricating oil aging characteristic tester
I. Comply with SH/T0192 standard
Ii. Main Technical parameters:
Hot bath size: 350×140×70mm 4 holes
Heating temperature: room temperature ~ 200℃±0.5℃
Temperature control mode: digital display temperature controller
Gas flow rate: 250mL±4mL/mim
Timing: Electronic timing
Power supply: AC220V± 10% 50HZ
Power: 1000 w
Iii. Performance Characteristics:
1. The electric heating plate is used to heat the metal aluminum alloy, which has the advantages of fast heating, large heat capacity and stable temperature. The metal bath is used to replace the oil bath, which overcomes various disadvantages of oil.
2. The instrument can be automatically controlled from room temperature to 200℃ at any point;
3. Adopt digital display temperature controller to automatically measure temperature and control temperature, temperature digital display is intuitive, sensing response is fast, resolution is high, temperature measurement is accurate;
4. Electronic timer and time digital display can be used to set the time arbitrarily within the specified range, which is convenient and reliable;
5. When the time relay is used for control, when the set time is reached, the instrument will automatically alarm and cut off the power supply;
6. The instrument has 4 holes, and 4 oxidation tubes can be inserted at the same time for comparison.
