污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料 其它水处理设备
津市市石油化工仪器有限公司
防锈性能试验器(JSH2502)
产品型号:JSH2502
产品名称:防锈性能试验器(JSH2502)
产品说明:
JSH2502防锈性能试验器
一、符合GB/T11143、ASTM D665标准
二、主要技术参数:
控温范围:常温~60℃
控温精度:±1℃
控温方式:数显温控仪控温
加热方式:电热管加热
试样孔数:4孔
热浴搅拌:电机搅拌
试样搅拌:减速电机搅拌 1000±50r/min(数字显示)
功 率:2KW
工作电源:AC220V±10% 50HZ
三、性能及特点:
1、本仪器可同时做四个样,采用一机四孔分别搅拌方式,四个搅拌电机分别独立控制,可以满足试样搅拌速度1000±50r/min;
2、采用数显温控仪控温,具有控温准确,显示直观;控制温度可设定在常温~60℃范围内任意一点;
3、采用数显计时器计时,计时准确,显示直观;
JSH2502 anti-rust tester
I. Comply with GB/T11143 and ASTM D665 standards
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 60℃
Temperature control accuracy: ±1℃
Temperature control: Digital display temperature controller
Heating mode: Electric heat pipe heating
Number of sample holes: 4
Hot bath stirring: Motor stirring
Sample stirring: speed reduction motor stirring 1000±50r/min (digital display)
Power: 2 kw
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The instrument can make four samples at the same time, and adopts a machine with four holes for separate stirring, and four stirring motors are independently controlled, which can meet the sample stirring speed of 1000±50r/min;
2. Adopt digital display temperature controller to control temperature, with accurate temperature control and intuitive display; The control temperature can be set at any point within the range of normal temperature ~ 60℃.
3. Use digital display timer for timing, accurate timing and intuitive display;
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份