污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料 其它水处理设备
津市市石油化工仪器有限公司
产品型号:JSH6001产品名称:润滑脂剪切实验仪(JSH6001)产品说明:JSH6001润滑脂剪切实验仪一、符合GB/T269标准二、主要技术参数工作器数:2个计数方式:数显计数器工作速度:60±10次/分钟工作行程:67~71mm孔板孔径:φ6
产品型号:JSH6001
产品名称:润滑脂剪切实验仪(JSH6001)
产品说明:
JSH6001润滑脂剪切实验仪 一、符合GB/T269标准 二、主要技术参数 工作器数:2个 计数方式:数显计数器 工作速度:60±10次/分钟 工作行程:67~71mm 孔板孔径:φ6.35+00.13 减速装置:WPA-70型蜗轮双出轴减速器 转 速 比:25:1 电机转速:1400转/分钟 工作电源:AC220V±10% 50Hz 功 率:370W 三、性能及特点 1、采用电动机带动减速系统的双工作器,以60±10次/分钟,行程67~71mm的上下往复运动进行工作剪切,可同时做2个样。 2、由电动机联轴器、减速器、偏心机构工作器、机座等部件组成。 JSH6001 grease shear tester I. It conforms to GB/T269 standard Ii. Main technical parameters Number of working units: 2 Counting method: digital display counter Working speed: 60±10 times/min Working stroke: 67 ~ 71mm Aperture plate aperture: 6.35+00.13 Reduction gear: WPA-70 worm gear double outlet shaft reducer Rev ratio: 25:1 Motor speed: 1400 RPM Power supply: AC220V± 10% 50Hz Power: 370 w Iii. Performance and Characteristics 1. Adopt the motor to drive the double working device of the deceleration system to shear 60±10 times/min with a stroke of 67 ~ 71mm up and down reciprocating motion. Two samples can be made at the same time. 2. It is composed of motor coupling, reducer, eccentric mechanism operator, frame and other parts. |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份