活性炭吸附+催化燃烧处理系统是将吸附材料装填在固定床中，再将吸附床与催化燃烧装置组合成净化处理系统。该工艺系统非常适合处理大气体量、低浓度的VOCs废气，净化效率高，运行节能其单套系统的废气处理量可以从几千m3/h到十几万m3/h，已普遍应用于汽车喷涂、印刷、医药化工等行业。特点:
1、操作方便:设备工作时，实现自动控制。
2、能耗低:设备启动仅需15-30分钟升温至起燃温度(有机废气浓度较高时)耗能仅为风机功率。3、安全可靠:设备配有阻火系统、防爆泄压系统、超温报警系统及*的自控系统
4、阻力小，净化效率高:采用当今*的贵金属钯、铂浸渍的蜂窝状陶瓷载体催化剂，比表面积大。5、占地面积小:仅为同行业同类产品的70%-80%，且设备基础无特殊要求。
The act ivated carbon adsorption + catalytic combustion treatment system is to fill the adsorption material in a fixed bed,ａnd then combine the adsorption bed with the catalytic combustion device into a purification treatment system. The processsystem is very suitable for treating large gas volume and low concentration of VOCs exhaust gas, and has high pur ificat ionefficiency and remarkable energy saving effect. The exhaust gas treatment capacity of a single system can be from severalthousａnd m3/h to hundreds of thousands of m3/h, which has been widely used. In the automotive spray, printing, pharmaceuti-cal and chemical industr ies. Features:
1. Convenient operation: automatic control is real ized when the equipment is working.
2，I ow energy consumption: the equipment starts only 15-30 minutes to warm up to the light-off temperature (when the or gan-ic waste gas concentration is high)， the ener gy consumption is only the fan power .
3，safe and reliable: the equipment is equipped with fire retardant system, explosion-proof pressure relief system, over-temperature alarm system and advanced automatic control system
4，low resistance, high purification efficiency: the use of today's advanced precious metal palladium, plat inum impregnatedhoneycomb ceramic carrier catalyst， large specific surface area.
5，small footprint: only 70%-80% of similar products in the same industry, and no special requir ements for equi pment base.
