当前位置：北京波威科技有限公司>>其他调制器/调制系统>>Integrated Optic Chip for Gyroscope

Integrated Optic Chip for Gyroscope

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品查看联系电话

联系方式：查看联系方式

更新时间：2021-08-19 16:24:40浏览次数：259次

联系我时，请告知来自环保在线

产品分类 品牌分类

  其他调制器/调制系统

全部产品列表

暂无信息

北京波威科技有限公司

经营模式：其他

商铺产品：732条

所在地区：

询价 给他留言

产品简介

Model:IOC-13-09-09-N1310nmintegratedopticalchips(Ywaveguide)input/output:125/250umPMfiber,1mfiberlength,withoutconnectorFeaturesX-Cut,y-propagatingLiNbO3Verylowinsertionloss.APEprocessforwaveguide,wor

详细介绍

详细信息

Model: IOC-13-09-09-N
1310nm integrated optical chips ( Y waveguide)
input/output: 125/250um PM fiber,1mfiber length, without connector
Features
X-Cut, y-propagating LiNbO₃
Very low insertion loss.
APE process for waveguide, works in single polarization
High extinction ratio
Fiber is sloping coupled with waveguide, which deduce optical return far and away
Push-pull electrode design may deduce half wave Voltage
Small packaging and lightweight
Excellent long-term stability
Applications
It is for attitude control of movements such as aircrafts, ships, guided missiles, autos etc
in the fiber gyroscope system, Hydrophone and other optic sensitive fields. Faraday Effect was used to measure current through fiber circuit in the current sensing system.

Parameter	Unit	Values
Wavelength	nm	1310
Insertion	dB	≤4.0
Half wave Voltage	V	≤4.0
Splitting Beam Ratio	-	47/53－53/47
Optical Return	dB	≥50
Polarization extinction ,chip	dB	≥55
Additional Intensity Modulating	-	≤0.2%
PM Pigtail Crosstalk	dB	≤-30
Electrode type	-	Push-pull modulating
Bandwidth	MHz	≥300
Pigtail type	-	PM
Work temperature	℃	-40～+70
Packaging dimensions	mm	30X8X5 or 35X10X5

Product photo and outline

Package outline

Operation Instructions
a. If the devices work under the single state of polarization, the polarization state of input light must conform to devices.
b. Avoid the Electrical damage of the devices; the electrode voltage of modulators should be lower 30V.
c. Applying too much force to fiber may cause it broking easily. Avoid drawing、twisting.
Bending radius must not be less than 30nm.
d. Avoid too much force between metal tube and fibers. Put up the tube and the fibers together when using it. Avoid bending at the joint of the tube and the fibers.
e. Storage environment humidity must be less than 50%, and not contain the materials which damages devices.
f. Avoid the devices suffering from intense thermal shock and inhomogeneous by heated
g. Avoid stressing to the joint of the fiber connection circuits.