当前位置：苏州君思仪器科技有限公司>>实验室常用仪器>>纯水机>>Milli-Q Integral 纯水系统

Milli-Q Integral 纯水系统

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号Milli-Q Integral 纯水系统

品牌

厂商性质其他

所在地苏州市

在线询价收藏产品查看联系电话

联系方式：查看联系方式

更新时间：2024-04-25 15:16:29浏览次数：177次

联系我时，请告知来自环保在线

产品分类 品牌分类

  实验室常用仪器

灭菌器

天平/电子秤/在线秤重

烘箱/干燥箱/培养箱

温度/湿度/测温仪/风速

搅拌器/分散机/摇床

定氮仪/索氏浸提

固相萃取/氮吹仪

旋转蒸发仪/浴槽/恒温器

离心机/浓缩/冻干

纯水机

冰箱/药品保存柜

超声波清洗器/粉碎

电热套/加热板

研磨仪

微波消解/石墨消解

其他

PH计/电导率

移液器/瓶口分配器

气体发生器/真空泵

全部产品列表

暂无信息

苏州君思仪器科技有限公司

经营模式：其他

商铺产品：230条

所在地区：

询价 给他留言

产品简介

概述Milli-Q® Integral is a unique combination of optimized water purification and monitoring technologies. It allows, in a single device, both pure (Type 2) and ultrapure (Type 1) water to be produced d......

详细介绍

规格

Water Specifications

Milli-Q® Integral ultrapure water (Type 1)

Resistivity at 25 °C1	18.2 MΩ•cm
TOC2	≤ 5 ppb
Particulates (size > 0.22 μm)3	< 1 particulate/mL
Bacteria3,4	< 0.01 CFU/mL
Pyrogens (endotoxins)4	< 0.001 EU/mL
RNases4	< 1 pg/mL
DNases4	< 5 pg/mL
Flow Rate	Up to 2 L/min
1resistivity can also be displayed non-temperature-compensated as required by USP 2in the appropriate test conditions 3with Millipak® final filter 4with Biopak® polisher These values are typical and may vary depending on the nature and concentration of contaminants in the feed water.

Milli-Q® Integral pure water (Type 2)

Resistivity at 25 °C1	Typically 10-15 MΩ•cm
TOC	< 30 ppb
Production flow Rate	3 L/h (Milli-Q® Integral 3) 5 L/h (Milli-Q® Integral 5) 10 L/h (Milli-Q® Integral 10) 15 L/h (Milli-Q® Integral 15)
From an E-POD® dispenser with final filter, the following water quality specifications are achieved:
Particulates (size > 0.22 µm)2	< 1 particulate/mL
Bacteria2,3	< 0.1 CFU/mL
Pyrogens (endotoxins)3	< 0.001 EU/mL
RNases3	< 0.01 ng/mL
DNases3	< 4 pg/µL
Flow Rate	Up to 2 L/min
1Resistivity can also be displayed non-temperature-compensated as required by USP 2with Millipak® final filter 3with Biopak® Polisher

Feed water

Feed water quality	Potable tap water as described in US-EPA, EP and WHO norms
Feed water connection	½" Gaz M
Feed water pressure*	1 - 6 bar
Feed water temperature	5 - 35 °C
* For pressure above 6 bar, a pressure regulator needs to be installed upstream of the system

System Specifications

Production unit

Dimensions (H x W x D)	500 x 332 x 484 mm (19.7 x 13.0 x 19.0 in)
Operating weight	24 - 28 kg (52.9 - 61.7 lb)
Electric power supply voltage	100 - 230 V +/- 10%
Electric power supply frequency	50 - 60 Hz +/- 10%
Milli-Q® Integral main unit data connection	Ethernet (RJ45)

Q-POD® & E-POD® dispensers

Dimensions (H x D)	579 x 230 mm (22.8 x 9.0 in)
Operating weight	4.7 kg (12.1 lb)
Dispenser tubing length	0.8 m (31.5 in)
Distance from production unit to Q-POD®	2.9 m (9.5 ft)
Electric power cable length	2.9 m (9.5 ft)
Q-POD® data connection	Parallel port (25-pin D-Sub)