3500/65-01-00-R0 3500/65监视器提供16通道温度监测

3500/65监视器提供16通道温度监测，并接受电阻温度检测器(RTD)和隔离热电偶(TC)温度输入。监视器调节这些输入，并将它们与用户可编程报警设定值进行比较。
监视器是使用3500机架组态软件编程的。可以配置16通道
温度监视器接受隔离热电偶，3线RTD, 4线RTD，或TC和RTD输入的组合。在三模冗余(TMR)配置中，必须以3个相邻监视器为一组安装温度监视器。在此配置中，监视器使用2种类型的投票来确保准确的操作并避免单点故障。

3500/65监视器提供16通道温度监测，并接受电阻温度检测器(RTD)和隔离热电偶(TC)温度输入。监视器调节这些输入，并将它们与用户可编程报警设定值进行比较。
监视器是使用3500机架组态软件编程的。您可以配置16通道温度监视器，以接受隔离热电偶，3线RTD, 4线RTD，或TC和RTD输入的组合。
在三模冗余(TMR)配置中，必须以3个相邻监视器为一组安装温度监视器。在此配置中，监视器使用2种类型的投票来确保准确的操作并避免单点故障

The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints.
The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel
Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs. In Triple Modular Redundant (TMR) configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid singlepoint failures.

The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints.
The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs.
In Triple Modular Redundant (TMR) configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid single-point failures