18576673708
当前位置：深圳市新朗普电子科技有限公司>>涂层/线缆高度/激光测距测试仪>>英国易高Elcometer│材料检测>> 112AL湿膜梳112AL湿膜梳│易高Elcometer【112AL冲压铝制湿膜测厚仪】
如有任何问题请与我司业务专员：
：豪
:fuhao@17Lp.com
英国易高Elcometer 112AL冲压铝制湿膜梳
这些冲压铝制湿膜梳成本低，用于测量湿膜厚度。
由于是用铝材料冲压而成，故精确度不如P.126的高精度测量仪。
每包共有10片湿膜梳，每片上一面为公制量程（25~3000μm），另一面为英制量程（1~118mils）。
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
| 符合以下标准 | |
| ASTM D 4414-A | BS 3900-C5-7B |
| ISO 2808-7B | NFT 30-125 |
| 型号 | 分类 | 量程 | 零件号 |
| Elcometer 112AL | Elcometer 112AL冲压铝制湿膜梳（x10） | 25~3000μm1~118mils | B112AL12473-3 |
How to use a Wet film Comb - Elcometer Wet Film Measurement
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，环保在线对此不承担任何保证责任。
温馨提示：为规避购买风险，建议您在购买产品前务必确认供应商资质及产品质量。
环保在线