QQ交谈
您所在位置：请输入产品关键字：
邮编：523078
联系人：廖先生
电话：0769-89770965
传真：
手机：15216878095
售后电话：15216878095
留言：发送留言
个性化：www.shyingzhe.net
网址：www.shyingzhe.net/
商铺：https://www.hbzhan.com/st97223/
下载-MOOG穆格771/772/773系列伺服阀手册
最近更新时间：2013-7-18
提 供 商：东莞市广联工业设备有限公司资料大小：844KB
文件类型：PDF 文件下载次数：385次
资料类型：未知文件浏览次数：1294次
穆格MOOG伺服阀The 771/2/3 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.They are a high performance, two-stage design that covers the range of rated flows from 1 to 15 gpm at 1000 psi valve drop.The output stage is a closed center, four-way sliding spool.The pilot stage is a symmetrical doublenozzle and flapper, driven by a double air gap, dry torque motor. Mechanical feedback of spool position is provided by a cantilever spring.The valve design is simple and rugged for dependable, long life operation.
穆格MOOG伺服阀These valves are suitable for electrohydraulic position, speed, pressure or force control systems with high dynamic response requirements.
Principle of operation
穆格MOOG伺服阀 An electrical command signal （flow rate set point） is applied to the torque motor coils, and creates a magnetic force which acts on the ends of the pilot stage armature.This causes a deflection of the armature/flapper assembly within the flexure tube. Deflection of the flapper restricts fluid flow through one nozzle which is carried through to one spool end, displacing the spool.
穆格MOOG伺服阀Movement of the spool opens the supply pressure port （P） to one control port, while simultaneously opening the tank port （T） to the other control port.The spool motion also applies a force to the cantilever spring, creating a restoring torque on the armature/flapper assembly。
Once the restoring torque becomes equal to the torque from the magnetic forces, the armature/flapper assembly moves back to the neutral position and the spool is held open in a state of equilibrium until the command signal changes to a new level.
穆格MOOG伺服阀In summary, the spool position is proportional to the input current and with constant pressure drop across the valve, flow to the load is proportional to the spool position.
穆格MOOG伺服阀VALVE FEATURES
➣ 2-stage design with dry torque motor
➣ Low friction double nozzle pilot stage
➣ High spool control forces
➣ High dynamics
➣ Rugged, long-life design
➣ High resolution, low hysteresis
➣ Compley set-up at the factory
➣ Small body size
：一八〇〇二七七〇一三〇 ：〇七六九-八九八七〇九二〇
〇七六九-二二三〇一〇九八 ：一九八五一〇五九六一