当前位置：镇江海太锅炉公司>>导热油锅炉>>导热油锅炉

导热油锅炉

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品查看联系电话

更新时间：2022-11-17 16:19:39浏览次数：138次

联系我时，请告知来自环保在线

产品分类 品牌分类

  导热油锅炉

全部产品列表

暂无信息

镇江海太锅炉公司

经营模式：其他

商铺产品：4条

所在地区：

询价 给他留言

产品简介

导热油锅炉

详细介绍

产品特点:

■ 导热油锅炉是基于强制循环的设计思维而开发的直流式特种锅炉。

■ 封闭循环供热，与大气相通，可延长锅炉的使用寿命，液相输送热能，热损失小，节能，环保效果好。

■ 本体采用烟气三回程盘管设计，这种直流式结构，决定了传统锅炉所不具有的安全性。

■ 由于采用盘管式结构，因此，受热面充足，使其具有较高的热效率。

■ 导热油锅炉，显著的特点是逆流换热，燃烧排烟温度与热导油出口温差在 30 ℃以下。

■ 导热油锅炉其的结构，主要是在较低的压力下运行，获取 450 ℃ 以下的工作温度，具有低压高温的特点。

Boiler explanation

※ Heating conducting oil boiler is a direct special boiler based on circulation compulsion design ideas.

※ Closed circulation heating connected to the atmosphere can prolong the life of the boiler. Liquid phase transportation of heat minimizes the loss the heat. The result of energy save is significant and the protection of the environment is great.

※ The body uses three-loop piping design. This is a direct circulation structure. The design decides the safety not possessed by traditional boiler.

※ Due to the piping design, the heating surface is abundant with high efficiency in heating.

※ A obvious characteristic of heat conducting oil boiler is reverse heat circulation. The difference of temperatures between combustion exhaustion and heat conducting oil is below 30℃.

※ The excellence of the structure of the heat conducting oil boiler is to operate under low pressure to obtain working temperature below 450 ℃. These are its characteristics of low-pressure and high-temperature.

Excellent System, Outstanding Characteristics

Perfect Design, Safe and Reliable

High Thermal Efficiency, Resources Saving

Easy Maintenance, Long Life

使用注意事项：

Special item to pay attention to when using:

■ 使用斯大导热油作为热载体的油、气的热载体锅炉，系统应配备膨胀槽，储油罐、安全组件，测量仪表和控制装置。

■ 导热油投入使用时，在开始运行阶段，先启动循环油泵，运行半小时后，再点火升温，初次使用时应缓慢升温，每小时升温约 20 ℃，当升温至180~ 200℃时，再保温一段时间，方可投入正常使用。

■ 在使用中应认真检查，严防水、酸、碱及低沸点物漏入使用系统，系统应装过滤装置，防止各种杂物进入，保证油品纯度。

■ 经使用半年后，应进行一次油品分析，长期使用后，若发现传热效果差，或其它异常情况，应对油品进行分析，根据分析结果决定添加或更换，判断标准量：碱碳不大于1.5%，酸值不大于0.5mgK(OH)/g,燃点变化不小于20%，粘度变化不大于15%，其中一项超标应更换新油。

■ 为确保导热油的正常使用寿命和导热效果，严禁超温使用。

※The oil and gas heat conducting boilers that use Star heat conducting oil to be the heat conduction should be equipped with expansion groove, oil storage tank, safety parts, measurement instruments and controlling equipments.

※When using heat conducting oil, at the beginning stage of operation, first start the circulation oil pump. After half an hour of operation, inflame and raise the temperature. When first using the boiler should raise the temperature slowly, 20℃ increase per hour. When the temperature reaches 180~ 200℃, keep the temperature for awhile before normal operation.

※Diligently perform inspections during the operation. Prevent water, acid, and base and other low-heating-point substance to enter the operating system. There should be filter system installed to prevent impurities from entering, to guarantee the purity of the oil.

※ After using for half a year, an oil sample analysis should be performed. After long-term use, if poor heating conduction is detected or other unusual conditions occur, analysis of the oil sample should be performed. There should be addition or exchange based analysis results: alkali carbon no greater than 1.5% and acidic value no greater than 0.5mgkoH/g. Point-to-point change is no less than 20% and adhesive degree is no greater than 15%.

※Any of these degrees is out of the standards should have new oil changed.

配套辅机参数：

Special item to pay attention to when using:

*的工艺流程：

Advanced work process

有机热载体锅炉是一种新型的特种加热锅炉，具有低压高温的工作特点，工作压力在0.1Mpa，甚至常压供热温度，液相340摄氏度或汽相400摄氏度，整体结构具有一定的弹性，考虑到运行中受热后各部件的自由膨胀，采用弯曲盘管式受热面，为了运行的更为安全、高效，还增加了空气预热器，炉膛内燃烧度加强，流速也增加，使得更为高效、环保、节能的服务于各个行业。

Organic heat conducting boiler is a new special heating boiler with low-pressure high-temperature specialty. The work pressu, re is at 0.1Mpa, even for the normal pressure heating temperature. At liquid phase of 340 degrees Celsius or liquid phase 400 Celsius, the whole structure is elastic. With the consideration of the free expansion after heating of various parts in operation, winding piping heating surface is used for safer, more efficient operation. In addition, air pre-heater is used and increased combustion temperature in the hearth, and increased flowing speed. It makes the operation more efficient, environmental friendly and energy saving for all industries.

锅炉房示意图：

Boiler抯 room diagram

型号		单位	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L	YY(Q)L
			350	460	580	700	930	1200	1400	1750	2100	2350	2950	3500	4100	4650
			Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)	Y(Q)
额定热输出功率		KW	350	460	580	700	930	1200	1400	1750	2100	2350	2950	3500	4100	4650
热效率		%	83
热效率		%	83
总发热量		10⁴Kcal/h	30	40	50	60	80	100	120	150	180	200	250	300	350	400
出口管径		DN(mm)	65	65	80	80	100	100	125	125	150	150	150	200	200	200
烟囱直径		mm	250	300	350	400	450	500	550	660	650	700	750	800	850	900
烟囱高度			12	12	12	12	12	12	12	12	12	12	15	15	15	15
外形尺寸		直径mm	1480	1500	1550	1550	1570	1740	1760	1850	1900	1930	2000	2090	2210	2290
		长mm	1480	1500	1550	1550	1570	1740	1760	1850	1900	1930	2000	2090	2210	2290
		宽mm	1170	1180	1220	1260	1350	1670	1750	1880	1950	2060	2180	2380	2610	2770
燃料耗量	轻油	Kg/h	35	46	58	70	95	121	131	176	212	236	297	352	412	468
	天然气	NM³/h	42	56	70	85	114	147	159	213	257	286	360	427	500	567
	城市煤气	NM³/h	90	119	149	181	242	312	338	453	546	608	765	907	1062	1205
油泵	流量	M³/h	20	28	34	40	43	60	75	100	110	120	160	200	240	280
	扬程	M	40	45	45	50	50	50	50	53	54	55	60	60	60	65
	耗电	KW	5	7.5	7.5	10	15	15	20	25	30	40	50	60	75	100
运输总量		KG	3300	3400	3700	4000	5500	6300	8500	10600	12000	12800	16800	20000	24800	29100