Main features:
主要特点
1) Can pull in the required high tem. to sample to get a rapid heating rate; also pull out the high tem. furnace and let the sample in the room tem. Environment to get a rapid cooling rate.
操作时可将实验需要的恒定高温直接推到样品处，使样品能得到一个快速的升温速度，同样也可将高温的管式炉直接推离样品处，使样品直接暴露在室温环境下，得到快速的降温速率。
2) Used for graphene growing or CVD experiment with RTP requirement
应用于有快速升温需要的石墨烯生长或CVD实验。
Technical Parameters
技术参数
Power 输入电源 | · Power rated: 3KW · 额定功率：3KW |
Voltage 电压 | · Voltage rated: AC208-240V 50/60HZ · 额定电压： AC208-240V 50/60HZ |
Working Temperature 工作温度 | · Max. Temperature: 1200 °C ( 1 hr) Z高温度：1200℃ (1小时) · Continuous working temperature: ≤1100℃ 持续工作温度：≤1100℃ · Max. Heating/colling Rate: ≤20°C /S Z大升/降温速率：≤20℃/秒 |
控温方式 | · PID automatic control and auto-tune function. 模糊PID控制和自整定调节 · 30 programmable segments for precise thermal processing. 智能化30段可编程控制 · Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
Length of heating zone 加热区长度 | · 200+200mm |
Length of constant zone 恒温区长度 | · 100+100mm |
Heating Elements 加热元件 | · Resistance wire, Fe-Cr-Al Alloy doped by Mo · 电阻丝（掺钼铁铬铝合金） |
Temperature Accuracy 控温精度 | +/- 1 °C |
· Φ50/60/80/100*1400mm(optional) · Φ50/60/80/100*1400mm(管径可选) · Two tube blocks are included for blocking heat radiation generated from tube center.,must be fully inserted into the furnace chamber before heating(quartz and ceramic optional). · 两个氧化铝管堵阻挡管中心产生的热辐射，管堵必须在加热前塞进炉膛的正确位置（石英和氧化铝管堵可选） | |
Dimensions 尺寸 | · Furnace size : 1500*380*620mm(L*W*H without tube & flange) · 炉子尺寸：1500*380*620mm(长*宽*高 不含炉管和法兰)
|
Net Weight 净重 | 130kg |
真空法兰 | · KF25 quick clamp flange 两端为KF25快速卡箍法兰
|
Vacuum Pressure 真空压力 | · 133torr can be achieved by mechanical pump 机械泵可达133torr（1pa） · 10^-6 torr can be reached by molecular pump 分子泵可达10^-6torr（10^-3pa） · Please click the picture below to order vacuum parts 点击下列图片订购真空部件
|
Warranty 质保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内） |
Warning 注意事项 | · Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. · 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
Compliance 认证 | · CE Certified CE认证 · The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付费进行TUV(UL61010)或CSA认证 |
Operation instructions 操作指导 | · Click to download the operating manual · 点击下载说明书
|
