污水处理设备 污泥处理设备 水处理过滤器 软化水设备/除盐设备 纯净水设备 消毒设备|加药设备 供水/储水/集水/排水/辅助 水处理膜 过滤器滤芯 水处理滤料 水处理剂 水处理填料 其它水处理设备
上海衡鹏企业发展有限公司
39-ICH08_ASEC低温焊接专用底填胶特点:Thisproductwhichbalancedcuringagent
39-ICH08_ASEC低温焊接专用底填胶特点: |
This product which balanced curing agent. It is possible to obtain characteristic of both LOW CTE and LOW TEMP CURING.
39-ICH08_ASEC低温焊接专用底填胶Liquid state: |
Property | Typical Value | Test Condition |
Chemical | Epoxy (Black) | |
Specific Gravity | 1.4 | @25˚C |
Thixotropic index | 1.0 | 12s-1 / 120s-1 |
Viscosity | 4.200 mPa・s | Cone plate type, 120s-1 |
39-ICH08_ASEC低温焊接专用底填胶Cured state: |
Property | Typical Value | Test Condition |
Tensile Modulus | 4.6 Gpa | 25˚C, DMA |
Tg | 120 ˚C | DMS |
CTE α1/α2 | 39/105 ppm/˚C | TMA |
Tensile shear strength | 16 Mpa | JIS K 6850 |
Volume resistivity | 2.28 x 1015Ω・cm | JIS K 6911 |
Surface resistivity | 9.7 x 1015Ω | JIS K 6911 |
Dielectric constant | 3.08 | 1.0GHz |
3.05 | 2.45GHz | |
Dielectric loss tangent | 0.015 | 1.0GHz |
0.015 | 2.45GHz |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
环保在线 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份