BAY系列防爆防腐全塑荧光灯，防爆防腐全塑荧光灯价格，防爆防腐全塑荧光灯厂家

产品简介

• 适用于爆炸性气体环境1区、2区；
• 适用于可燃性粉尘环境20区、21区、22区；
• 适用于ⅡA、ⅡB、ⅡC级爆炸性气体环境；
• 适用于温度组别为T1~T6/T4的环境；
• 适用于石油采炼、储存、化工、医药、纺织、印染、*及军事设施等爆炸性危险环境。
• 根据外壳材质不同有聚碳合金和SMC两种产品可选。
• Applicable to explosive gas environment zone 1, zone 2;
  Can be used in flammable dust environment 20, zone 21, zone 22 zone;
  Applied to A, B, C grade II II in explosive gas environment;
  Apply to the temperature required for T1 ~ T6 / T4 environment;
  Applicable to the petroleum production and refining, storage, chemical, medicine, textile, printing and dyeing, military and military facilities in explosive environment.
  According to the housing materials of different poly carbon alloy and SMC two optional products.

BAY系列防爆防腐全塑荧光灯，防爆防腐全塑荧光灯价格，防爆防腐全塑荧光灯厂家

产品特点

• 壳体采用进口聚碳合金注塑，强度高、耐冲击、耐腐蚀、耐热性、耐寒性好；
• 灯罩采用聚碳酸酯注射成型，投光率高、承受冲击能力强；
• 灯具采用*的双舌式设计密封条结构，具有较强的防水、防尘性能；
• *的双抛物面设计反光罩，使灯具光效大幅提高；
• 接线方便，只需打开灯罩，即可直接接线；
• 采用卡紧式接线端子，安装方便快捷；
• 配用荧光灯管，寿命长、光效高；
• 配装我公司特制的防爆电子镇流器；
• 内置隔离开关，当产品大楷时自动切断电源，提高产品的安全性能；
• 带应急装置的荧光灯在供电线路失电时，自动切换到应急照明状态；
• 应急装置内有特别设计的过充、过放保护电路；
• 钢管或电缆布线。
• The shell adopts the imported polycarbonate alloy injection molding, high strength, impact resistance, corrosion resistance, heat resistance, cold resistance;
  The lampshade adopts polycarbonate injection molding, cast light rate is high, strong impact bearing ability;
  The lamp adopts unique double tongue type design of seal structure, with strong waterproof, dustproof performance;
  The unique design of the double paraboloid reflector, so that the lamp light efficiency increase;
  Convenient wiring, simply open the shade, can direct wiring;
  The clamping type connecting terminal, convenient and quick installation;
  With the well-known brands of fluorescent tube, long life, high luminous efficiency;
  With my company 's special explosion-proof electronic ballast;
  Isolating switch, when the product is large when the power supply is automatically cut off, to improve the safety performance of the product;
  The emergency device of fluorescent lamp power supply line in the power failure, automatically switch to the state of emergency lighting;
  Emergency device within a specially designed overcharge, overdischarge protection circuit;
  Steelpipe and cable wiring.

技术参数

• 执行标准：GB 3836.1、GB 3836.2、GB 3836.3、GB 12476.1、IEC60079
• 防爆标志ExdⅡCT4、DIP A20 TA,T6
• 额定电压：AC 220V
• 灯座规格：G13、G5
• 配装光源：T8双脚荧光灯管（1  36W、2  36W）  T5双脚荧光灯管（1  28W、2  28W）
• 电池充电时间：≤24h
• 应急起动时间：≤0.3s
• 应急照明时间：90min
• 防护等级：IP65
• 防腐等级：WF2
• 引入口规格：3-G3/4"
• 适用电缆外径：φ9mm~φ14mm
• Executive standard: GB 3836.1, GB 3836.2, GB 3836.3, GB 12476.1, IEC60079
  Explosion proof mark Exd II CT4, DIP A20 TA, T6
  Rated voltage: AC 220V
  Lamp socket specifications: G13, G5
  Equipped with light source: T8 feet fluorescent lamp （1 36W, 2 36W ） T5 double fluorescent lamp （1 28W, 2 28W ）
  Battery charge time: < 24h
  Emergency starting time: < 0.3s
  Emergency lighting time: 90min
  Protection grade: IP65
  Anticorrosion grade: WF2
  Introduction of export specifications: 3-G3 / 4"
  Application of outer diameter of cable: diameter of 9mm ~ 14mm diameter

BAY51-Q防爆防腐全塑荧光灯安装与维护

• 只需打开壳体外部的卡扣，大楷灯罩即可接线；
• 引入装置的密封圈应确保可靠压牢并将电缆夹紧；
• 灯具上多余不用的引入口请采用堵板和压紧螺母可靠密封确保防爆性能和防护等级能；
• 灯具投入使用前必须将内外接地牢固、可靠地接入用户现场接地系统；
• 安装及维护灯具时，严禁带电打开；
• 定期检查密封面，如发现其老化应及时更换；
• 荧光灯的应急电池出厂时处于放空状态，用户使用前应先充足电方可正常使用。
• Just open the shell buckle, block shade can connection;
  Introducing device of the ring should be pressed firmly and ensure reliable cable clamp;
  Lamps spare inlet use blocking plate and a compression nut sealing to ensure reliable explosion-proof performance and protection grade can;
  Lamps used to be inside a solid grounding, reliable access to the user site grounding system;
  Installation and maintenance of lighting, strictly charged to open;
  Regularly check the sealing surface, where it is found that the aging should be replaced;
  Fluorescent lamp emergency battery factory in the empty state, before the user is used should be sufficient power can be normal use.

 BAY51Q防爆防腐全塑荧光灯 防爆防腐全塑荧光灯