常州市金坛区环宇科学仪器厂作者
FSH-2可调高速匀浆机
资料类型 | doc文件 | 资料大小 | 40KB |
下载次数 | 477 | 资料图片 | 【点击查看】 |
上 传 人 | 默认 | 需要积分 | 0 |
关 键 词 | 高速匀浆机,高速匀浆机厂家,高速匀浆机价格 |
- 【资料简介】
一、产品简介
该产品采用可控硅高速度的调节系统,霍尔元件测速采用了*的电子线路,数字显示清晰,使用方便。经中国医科院卫生研究所等单位使用,其质量达到国外同类产品*水平。
二、技术指标
★电机转速:20000转/分
★大匀浆刀:8000-18000转/分
★小匀浆刀:8000-20000转/分
★连续工作时:≤5分钟
★功 率:185W
★电源电压:220V±10% 50HZ
★环境温度:-10-45℃
★整 机:10KG
★外行尺寸:300*250*400平方米三、产品特点
★采用内吸式匀浆结构,高速度。够进行对不相溶的两液体之间匀浆、乳化和水中微量有机化合物、脂溶物及对有机溶媒可溶性物质的萃取。
★对各种动物、植物的组织均能达到匀浆和混合目的。
★能使细胞膜破裂至核分离,并能用不同速度使DNA链断列或使大分子物质断列成小分子物质。
★低速时可作搅拌器使用。
★转速数字显示,读数直观。One, product introduction
The product adopts the controllable silicon high speed regulating system, Holzer element velocimetry using advanced electronic circuit, clear digital display, easy to use.
By the Chinese Academy of Medical Sciences and Health Research Institute and other units to use, its quality reaches the advanced level of similar foreign products.
Two, technical indicators
Of motor speed:20000 rpm
Of large homogenate knife:8000-18000rpm
Of small homogenate knife:8000-20000rpm
In less than5 minutes of continuous working:
The rate of power:185W
In the power supply voltage:220V + 10% 50HZ
Environment temperature: -10-45C.
In the whole machine:10KG
Of dimensions:300* 250 *400 square meters
Three, product characteristics
The suction of homogenized structure, high speed. Enough of immiscible liquid between two efficient homogenate, emulsification and trace organic compounds, fat soluble substances and for organic solvent soluble substance extraction method.
* for various animal, plant tissue can reach the homogenized and mixed.
In that rupture of the cell membrane to nucleus of separation, and can be used in different speed so that the DNA chain break or make the big molecule substance break into small molecular substances.
Low speed can be used as a stirrer.
Of digital speed display, intuitive readings.
上一篇:旋涡泵工作特性及优缺点
- 凡本网注明"来源:环保在线"的所有作品,版权均属于环保在线,转载请必须注明环保在线,https://www.hbzhan.com。违反者本网将追究相关法律责任。
- 企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
- 本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
- 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。